info on some renault wheels

[Schakal]

there are funny shaped locking bolts on them which are
surface rusted to death ,as it happens i have not got the
key to unscrew them either

any ideas before i slit the screws and turn them over with the
good old "flat blade & fooking hammer" method ?

[Penfold aka The Dealer]

I used plyers on mine to hold onto the remaining screw but your method will do just aswell :-)

[TNT Tricky Nicky]

had them on a 19 once, i had a flat blade screw driver just the right size to fit between the pin and flat edge and could turn them like a normal screw

[Schakal]

had them on a 19 once, i had a flat blade screw driver just the right size to fit between the pin and flat edge and could turn them like a normal screw

cheers mate ,thats well worth a shot me thinks provided the
screws are not rust welded in situ

[BriC]

had them on a 19 once, i had a flat blade screw driver just the right size to fit between the pin and flat edge and could turn them like a normal screw

I've done that as well on some wheels. Worked a treat.

[Brigsy]

If all else fails drill the head off carefully.

[Schakal]

in the end managed to get them out easily using long nose pliers

[mr bean aka pete]

are the centre cap bolts 3 holes on the outside and a hole in the middle ??? if they are i have a few spare keys at work and if your coming to the frome flyer meet r bring 1 along if you like ??