Hopefully attached are some photos of my new R5 GT Turbo after getting it back from Mike and Tony at Gt Turbo spares, they made an outstanding job, well pleased highly recommended....
Hopefully attached are some photos of my new R5 GT Turbo after getting it back from Mike and Tony at Gt Turbo spares, they made an outstanding job, well pleased highly recommended....
Last edited by clarkey21; 11-01-2015 at 21:58.
hey mate if you edit your post and put [img ] *your photobucket link* [/img ] and remove the space after img it will display your pictures! also for future refernce when on photobucket you can get the img code already to copy and paste if you get me
Lovely looking five and some interesting pipe runs.
It's low at the back - bet you feel every bump in the road.
Has mike done a resto on this car or is it one of his from stock?
Engine bay looks so fresh!
It has 35mm Apex springs on the front and the back has been lowered to match...
The original engine was a Phase 1 and in a a poor state, so had a new one fitted and totally rebuilt to a show standard, new high lift cam, lightened and balanced bottom end etc. engine bay repainted while engine out, made sense really....
that looks awesome man! i really hope you get many miles of enjoyment out of it
Originally Posted by Jimmy5
Only the engine and bay, I bought it from a guy in Bedford, 6 owner no history as such, been off road a while I think as the tyres had a date code of 2004...
Thanks Rob, as you can see that did work...hey mate if you edit your post and put [img ] *your photobucket link* [/img ] and remove the space after img it will display your pictures! also for future refernce when on photobucket you can get the img code already to copy and paste if you get me
Very nice . Your pipe on top of the oil breather pot thing goes into the wing , where does it connect to ?
Mike tells me its the breather for the carb, as its all been tuned, gas flowed no need for the perc fan.....😕
Good work, love a red 5!
Very nice.
Looks great. I am loving the look of the standard 13 inch speed lines at the moment too
Cracking job
Very nice!!
Looks like a quality job that
Be aware that you are missing the small bonnet cable that is a backup in case the bonnet stay comes out of it's seating. It runs from the bonnet stay hinge to the upper cross member.
Without this, the bonnet is able to go too far forward and it can damage the grill if that happens.
This thing here:
Good spot Trev.
Awesome looking car. Mine was red when I bought it before I had it repainted.
Nice tidy motor that.. Love red 5s
Yes I do have one, did post a question as to where it was fixed but was unsure...Looks like a quality job that
Be aware that you are missing the small bonnet cable that is a backup in case the bonnet stay comes out of it's seating. It runs from the bonnet stay hinge to the upper cross member.
Without this, the bonnet is able to go too far forward and it can damage the grill if that happens.
This thing here:
Had the wheels refurbished at The Wheel Specialist, they do make a hood job of them...
Ahh of course
Just pop down to any meet and check out other folk's cars. Pretty sure there's a hole for a rivet in the plastic bonnet stay clip (at the bonnet end), and the other end rivets to the front panel's top member.
Posting Permissions
Reply With Quote