Results 1 to 10 of 10
  1. #1
    Non-member
    Join Date
    Jun 2013
    Location
    Cornwall
    Posts
    3
    Post Thanks / Like

    Valve stem oil seals

    First post!

    Hello eveyone ive just joined so this is my first thread, ive just brought a Cylinder head for my phase 2 R5 and the valve seats look different to the cylinder head ive just removed. I ordered some new oil stem valve seals that said they fit a Phase 1 and phase 2 head but they dont fit After researching I think i have brought a Phase 1 Head, ive heard some volvo oil stem valves might fit but which ones ? Ive also heard that some people dont even use them is this true or will i have smoke bellowing out of my exhaust any help would be much appreciated thanks. Really want to get to Santa pod for Saturday but my five is in a million pieces cheers.

  2. #2
    Ireland Area Rep turbo ted's Avatar
    Join Date
    Sep 2008
    Location
    Ireland Co. Kilkenny
    Posts
    645
    Post Thanks / Like

    Re: Valve stem oil seals

    hi there
    welcome to the club phase 1 and phase 2 are the same,the head you bought might had head work done to the seats for uprated valve springs, you can run the engine without valve stems seals if your valves guides are good, most people you run a lot of boost don't run stem seals.
    regards turboted

  3. #3
    Non-member Brigsy's Avatar
    Join Date
    Sep 2008
    Location
    Redcar
    Posts
    4,138
    Post Thanks / Like

    Re: Valve stem oil seals

    Dont fit any valve stem oil seals mate, they will only end up in the sump.

  4. #4
    Committee, NW Regional Rep Alex's Avatar
    Join Date
    Sep 2000
    Posts
    3,120
    Post Thanks / Like

    Re: Valve stem oil seals

    I beleive the Ph1 heads didn't have stem seals on as standard. As said, no real need to fit them.

  5. #5
    Non-member
    Join Date
    Sep 2008
    Location
    Dartford
    Posts
    1,405
    Post Thanks / Like

    Re: Valve stem oil seals

    Ye I also thought the Phase 1's didn't have them either..

    However I also heard that the raider versions run double stem seals

  6. #6
    Non-member SCHWARTZ's Avatar
    Join Date
    May 2009
    Location
    Wallington south london
    Posts
    3,102
    Post Thanks / Like

    Re: Valve stem oil seals

    That's to hold in the extra power dave

  7. #7
    Committee, Shop Manager, SE Regional Rep Bigfoot's Avatar
    Join Date
    Jan 2005
    Location
    Essex
    Posts
    5,735
    Post Thanks / Like

    Re: Valve stem oil seals

    32 stem seals in total don't fancy changing mine then, the Raider is 16v aren't they

    If you worried about lifting, some people fit the red top valve stem seals which have a better hold.

  8. #8
    Non-member
    Join Date
    Jan 2010
    Posts
    191
    Post Thanks / Like

    Re: Valve stem oil seals

    I got asked if my white phase 1 was a raider at the petrol station on Sunday! Ha I told him yeah its got a special edition 2ltr engine only found on the raider model !!!

    Also I thought the valve seats were different on the phase 1's

  9. #9
    Non-member
    Join Date
    Jun 2013
    Location
    Cornwall
    Posts
    3
    Post Thanks / Like

    Re: Valve stem oil seals

    New poster! (less than 10 posts)

    Cheers for the replies not going bother with the stem seals then, looks like alot of people not running them, cant wait bolt it all together on friday apparently the suns coming out next week believe it when i see it

  10. #10
    Non-member
    Join Date
    Sep 2008
    Location
    Dartford
    Posts
    1,405
    Post Thanks / Like

    Re: Valve stem oil seals

    If you have decided not to run them make sure that the guides aren't worn as it'll smoke

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •