Results 1 to 4 of 4
  1. #1
    Non-member
    Join Date
    Apr 2013
    Location
    Dublin
    Posts
    117
    Post Thanks / Like

    Help - speedo not working

    Help please ..
    Speedo isn't working
    Not sure if its the clock or something else
    Any thoughts or tips appreciated thanks

    I have the clock out is there any way to test it?
    Or where does it get the signal from?

  2. #2
    Non-member Nottswoody's Avatar
    Join Date
    Feb 2012
    Location
    Nottingham
    Posts
    2,683
    Post Thanks / Like

    Re: Help - speedo not working

    First check its still connected in your gearbox or burnt on your exchust follow the wire to the joining black clips pull apart and separate a little the three male connections as try get worn.. Ten clean the connections behind the clocks.. Of those three don't worked your ****ed worked for mine after two years of not workiń

  3. #3
    Non-member
    Join Date
    Apr 2013
    Location
    Dublin
    Posts
    117
    Post Thanks / Like

    Re: Help - speedo not working

    Thanks mate will try that

  4. #4
    Non-member StuHERTS's Avatar
    Join Date
    Sep 2012
    Posts
    290
    Post Thanks / Like

    Re: Help - speedo not working

    Mine was the connector on the back of the speedo
    http://i1259.photobucket.com/albums/...ps4bfc4737.jpg
    Theres also a plastic strip there with 2 or3? metal strips on it., make sure thats not gunked or has crap on and put back in.
    Also,
    Disconnect this, clean and put back.
    http://i1259.photobucket.com/albums/...ps32734cfd.jpg

    I had to just adjust the speedo needle as it was 10mph out, prying it off with a fork and moving it 10mph forward, if you do, it's very delicate so be careful...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •