-
Gearbox / engine joint cover
I was fitting an oil pressure tester to the engine, and while removing the pipe from the turbo that goes to the oil pressure sender I dropped the nut from the bracket into the slot between the gearbox and engine, at the top. It seized the engine. Luckily it fell out when I removed the flywheel cover. Is there a plate I should have that covers this slot? It's about 3" long by 8mm ish.
I'm considering sticking some silicone on it.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules