PTFE inlet manifold gasket for megane f7r

[JP Racing]

Does anyone know where I could get one made thanks jp

[James5]

Does anyone know where I could get one made thanks jp

16v_paddy on clio 16 valver forum makes them matey for the f series engine's

http://www.clio16valver.co.uk/forum/...p?f=12&t=31513

[Dave Reed]

Are these needed for the turbo applications then guy's?

[James5]

Are these needed for the turbo applications then guy's?

No you can use std if you wanted. allegedly help with being better heat barrier and they are reusable aswell

[Dave Reed]

No you can use std if you wanted. allegedly help with being better heat barrier and they are reusable aswell

Cool cheers james.

Looks like I'd better get in contact with this guy to then

[Tutuur]

could use one too if they arent too expensive...

[Dave Reed]

Here's the web site


http://powergaskets.co.uk/page7.htm

[HAndy]

bamracing on facebook

contact 07830-108200 or 07870-577512

water cut any flange you want

stilll up for a ptfe 10mm inlet gasket

johno's got one for his 1.8 vag turbo inlet, very nice it is too


don't think 3mm is enough, heat transfer and all 8mm min really

[Tutuur]

that thick

[JP Racing]

I need 8mm not because its needed other than to space my manifold back to fit my injectors if anyone needs one I have an f7r inlet gasket ptfe 3mm that is new and never used and a f7p gasket too at 3mm

[HAndy]

I need 8mm not because its needed other than to space my manifold back to fit my injectors if anyone needs one I have an f7r inlet gasket ptfe 3mm that is new and never used and a f7p gasket too at 3mm

dont sell em just yet you will need them as a template

[Tutuur]

if yo do sell i could be interested in the 3mm f7p i think. i have an f7r but the williams style and not megane style head.

[JP Racing]

Sorry Arthur it has been sold pending payment to dave reed who txt me last night at 10pm

[Tutuur]

no probs