R5 GT Turbo Gearbox + Engine...

[LeccyBlue5]

First post!

as the title says.

my gearbox dosnt like going into 5th and some slight grinding in some gears so am after a new box.

also the bottom end of the engine has become rather noisy so im reckoning this needs replacing or a whole engine may just be easier.


thanks.

[LeccyBlue5]

New poster! (less than 10 posts)

anyone !? dosnt have to be as one.. can be gearbox or engine seperate

[James5]

Going to bump this to help John out this is needed urgently to keep another gtt on the road any local members got the bits?? Or bring to surrey meet?

[chris]

Have you tried the useual suspects

[James5]

Have you tried the useual suspects

As in Mike then yes I think John has really hoping other locals have something be it a decent block needing a head etc... and decent box.

[philr5t]

As in Mike then yes I think John has really hoping other locals have something be it a decent block needing a head etc... and decent box.

Didn't you just sell dave (shaggy) a good box mate

[shaggy]

I've still got the box mate if you still need it.

[James5]

Didn't you just sell dave (shaggy) a good box mate

I did indeed and have pm'd Dave to see if he would sell

I've still got the box mate if you still need it.

Dave many thanks for pm response I have messaged John hopefully he will have it



Just need to source a decent running engine or a decent complete bottom end now locally

[SACK 09]

New poster! (less than 10 posts)

anyone !? dosnt have to be as one.. can be gearbox or engine seperate

try jimgtt on here, he has an engine and gearbox 4 sale this is his engine

GTT engine, freshly rebuilt (new piston/ liners/ bottom end bearings/shells/valve stem seals/timing chain tensioner/uprated headgasket/new uprated headbolts/new water pump reciepts for all parts from CGB@end of oct 2012) (carb not included)engine has done just over 1000 miles £400ono

[phase i 16 v turbo]

Have then still in the car he can see them running and driving and then we can pull it out.

[James5]

Bump still needed on a budget, Mike Pm'd you for some part's I may consider sorting the existing bottom end out worst case.

[AidenJ]

I have an engine that dropped a valve so pistons, head and liners are knackered but as far as im aware the bottom end is fine. I also have the gearbox that came with this engine but it is missing the clutch cover/stabilising plate. If you're interested pm me.

[LeccyBlue5]

New poster! (less than 10 posts)

should prob mention im in the sussex area so the closer the better. dont really have time to be traveling up the country,

cheers