Piper 285 cam, valve springs, and 195/45-15" tyres

[Mart]

Happy New Year to all.

Long shot I know, but I'm after the following if anyone has them for sale...

Piper 285 camshaft - Would need to know the spec though, as Piper have produced several different variants of their 285 cam over the years. Lobes etc must be in good condition.

Piper or Catcams valve springs.

Also after a decent treaded set of 195/45-15" tyres. No puncture repairs, bulged/cracked sidewalls, or 'wanli ditch-finders'

Cheers.

[TNT ANDY]

Hi Mart - I may have a vernier that has 1 stripped thread in it if you are struggling. You can have it for nowt if nothing else comes along.

[gtmatt]

I will have vernier if Mart does not

[Mart]

Hi Mart - I may have a vernier that has 1 stripped thread in it if you are struggling. You can have it for nowt if nothing else comes along.

Hi mate,

PM for ya

[Mart]

Pulley now sorted (many thanks Andy ).

Still after the other items...

[phase i 16 v turbo]

Hi have new 285 in stock and a set of the tyres you require. Will need to check side walls.

Thanks
Mike

[Mart]

Howdo Mike

Do you know the spec of the 285; ie, cam/valve lift, full lift point, timing figures?

There's only a couple of Piper 285's which fit the bill. The rest are a bit 'mild'.

Let me know about the tyres please mate

[Mart]

Bump

[Mart]

Valve springs anyone?

[phase i 16 v turbo]

Have both. Bid the picture give you the info you needed?

[Mart]

It did Mike, but not the type of '285' I'm after. Nothing wrong whatsoever with your sticks, just I'm after the older variant of it. Thanks anyway though

How much can you supply the springs for?

Cheers.

[phase i 16 v turbo]

It did Mike, but not the type of '285' I'm after. Nothing wrong whatsoever with your sticks, just I'm after the older variant of it. Thanks anyway though

How much can you supply the springs for?

Cheers.

I can ask Tom at piper if he can help if you know what you need.

[Mart]

It's fine mate, thanks all the same; I can sort it with them if needs be. Might be going down the higher rocker ratio route now anyway.

Could you PM me a price for the springs though please