Need part number to show model car and version

[James5]

I am in need of some assitance I have a part number for a renault throttle body but need to know what car and model it is of 7700871215.

I was told it was a clio 172 phase 1 throttle body but I have checked my dialogys and there are 2 x part numbers for the cable throttle body and the one I have is neither.

The reason I am checking is that i have gone to fit it tonight only to find out that this throttle body does not align up with the bolt holes on my inlet plenum???

Engine is ready to drop into the car pending a cable throttle body?

The numbers I got of my dialogys
7700113285
8200053557

[James5]

Ashy cheers for the advice on the Cliosport site matey will do that.

[James5]

If moderator want to delete this post please do

[Ashy]

ok

[Ashy]

James, as I just posted on cliosport

"Altough looking at that throttle body it looks like the meganne type? I'm sure the clio ones don't have the water cooled / heated section."

[Scoff]

if its of any interest james I use a volvo T5 throttle, it's 60mm, it only takes a re-drill and tap of the plenum to fit. 60mm might be a bit big for what you want though.

[paul b]

the first number you posted is not a valid part number, possibly just the casting part number of the housing......

no more i can tell you on that part , sorry

[James5]

if its of any interest james I use a volvo T5 throttle, it's 60mm, it only takes a re-drill and tap of the plenum to fit. 60mm might be a bit big for what you want though.

Cheers Chris there are a couple of Volvo T5's down my local scrappy which I can rape for bits.