First issue with rebuild.....

[LiamR]

I am have come across my first issue, it's only a small one and I am sure there will be more but a spot of help would be appreciated please....

There is a bracket that comes off the bottom of the down pipe with a support bar connected. Where on the block/head does this connect to?

Need to get this done so I can put on the manifolds, starter loom and starter heatshield...

[michael tierney]

i think the support bar is bolted to one of the manifold studs

[LiamR]

That would make sense. Can anyone else confirm???

[Jonny5]

I bent my bar to bolt to the threaded stud on the back of the block. Easier to fit and less stress on the head.

[Brigsy]

The bar bolts on to one of the manifold studs, the plate bolts to the block.

[Logg]

This is where the oe one should bolt.



But due to me running a tubular manifold and there not being much room I now run one off the block.

[LiamR]

Cheers mate

That pic was perfect! Good bit of handywork making your own bar to connect to the block too.

I am practising my welding at the moment, and god am i awful!!lol. Not going anywhere near the 5 yet!

[Logg]

I wish I could weld I paid for that to be made for me.