Zvh engine wanting efi

[dizzeeR5]

Me and a mate of mine are doing up his zetec s. we have got a zvh for it which is a 2.0 zetec lump that we have bored to 2.1 and got forged pistons and conrods ,apr bolts.

The head is off a escort s1 rs turbo which is mfi.

We would like to have efi so we can get more power as we have 180bhp with a t3

How should we go about this as I'm used to r5gtt m there simpleness lol

Cheers


Callam

[mike r5 gtt]

prob much easier doing this than efi on a gtt imo as loads of the ford bits are
interchangeable and you dont have to make manifold

easyst/cheapest way would b to get the bits from a efi cvh rs turbo and just swap all the bits over
you can use the mfi head but you will need to buy a sandwich plate for the inlet side/injectors

only limits are the depths of your pockets really

does the zetec-s not have an engine in it already??as fitting a zvh seems like a bit of a step backward?