would anyone be interested in a water system pressuriser to test for leaking pipes, heads, liners etc?
i can get them made up for £5.
it's got a standard tyre valve in the top of it, so you can use a foot pump to pressurise the system.
THIS UNIT FITS RENAULT 5'S AND CARS WITH THE SAME EXPANSION CAP .
not evo's, or any cars like that....
I would if I didnt already have one. They are really handy to have.
I could do with a new'un, so yep I'd take one for a fiver mate.
Any chance of a boost cct equivalent as well? My baked bean can has seen better days
Mart ive made a boost circuit tester
If you get a plumbing waste rodding access cap (come in different sizes) and drill a hole in the cap then silicone in a tyre valve it works fine.
I have pumped my system up to 3bar using it.
nah, ive nt got a boost eqivalent unfortunately.Originally Posted by Mart
I could do with a new'un, so yep I'd take one for a fiver mate.
Any chance of a boost cct equivalent as well? My baked bean can has seen better days
Stu, I use a baked bean can (with a tyre valve glued into the base), but it's all deformed & hard to get a good seal these days.
I haven't a scooby what a rodding access cap isbut I'll look into it
Cheers
Any plumbing/diy shop should have it.
Its solid plastic so wont deform.
If its too small a bit of silicon pipe as a spacer will wor, ive used the same 2"(50mm) fitting on 50/60/70mm pipe.
And a roddin access means you can unscrew the lid to let the pressure out.
I can make a few up if people want?
im game .... mr branston...
I believe it's something like this (I just had a look as actually need one)Stu, I use a baked bean can (with a tyre valve glued into the base), but it's all deformed & hard to get a good seal these days.
I haven't a scooby what a rodding access cap is
http://www.wickes.co.uk/solvent-weld...p/invt/431986/
im game .... mr branston...
Ahh, gotcha
thats the 1
get a 2" and it will fit straight into a 50mm boost pipe.
i connect mine to where the air filter goes, then you can test the full system inc boost control and you can even watch for what boost the actuator opens lol
Stick me on the list for one please.
Pop me on the list too please mate
Bargain buys, count me in for one please.
Handy bit of kit these and a boost system pressuriser is a must for everyone especially the FMI crew.
no sign of it yet....
..look out for a payment from sadie graham....
Is it to late to put my name down for one
like i said...no payment received.
are you sure you sent it to the correct paypal address?
just a heads up , i did this same setup for brakes.. i bang on the compressor, not only does it check for leaks, but it makes bleeding brakes then all lines have been replaced a dodle
DOH...i put co.uk. ....
First post!
I'd like one of these, please.
Peter
Arrived today.
A handy bit of kit.
Cheers Sparkie
please let me know if anyones unit doesnt arrive.
Posting Permissions
Reply With Quote