Results 1 to 3 of 3
  1. 09-12-2011, 23:18 #1
    REGGY5GT
    REGGY5GT is offline
    Non-member REGGY5GT's Avatar
    Join Date
    Nov 2009
    Location
    shropshire
    Posts
    538
    Post Thanks / Like

    fse fuel pressure regulator..

    what should this be set to on idle and how do you go about setting this up ok?? would i be able to get away with using this instead of changing the injectors to run more than 16 psi of boost, thanks
    Reply With Quote Reply With Quote
  2. 10-12-2011, 13:50 #2
    Dave Reed
    Dave Reed is offline
    Non-member
    Join Date
    Sep 2008
    Location
    Dartford
    Posts
    1,405
    Post Thanks / Like

    Re: fse fuel pressure regulator..

    Have a read of this, further down the page.. https://www.rtoc.org/boards/showthread.php?t=20401

    As for the base fuel pressure, see what it is now (on the standard reg) then fit the FSE to the same.. Then I'd add no more than an extra bar of fuel pressure IMO.. May work may not. You'll need some sort of lamba sensor and poss det can's whilst you turn up the boost
    Reply With Quote Reply With Quote
  3. 10-12-2011, 13:52 #3
    Dave Reed
    Dave Reed is offline
    Non-member
    Join Date
    Sep 2008
    Location
    Dartford
    Posts
    1,405
    Post Thanks / Like

    Re: fse fuel pressure regulator..

    O and just to add you should remove the vac hose from the FPR to get your fuel pressure set point on the orignal set-up.
    hope that helps.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules