possible 1/4 mile times from my 5

[djinuk]

Theres an event coming up that some of my friends will be attending at shakespeare raceway.

My cars currently running 18psi on a t2/t25 hybrid and seems to pull very strong, it has a very large front mount and i have jetted it to suit, 11.7 @ wot currently.

I have a fresh engine to go into the ar after this one so i dont mind pushing it pretty hard.

The question is what kind of times should be possible, i have a full weekend there so will take a few jets and the lm1/det cans, and see if i can get it fueling for a little more boost.

[Slim]

js wack it up to 25 psi and hold ur breath lol

[Logg]

I'd say mid 14 maybe a high 13 if your cars very light and you can get a 2 sec 60ft.

What size rear housing has your turbo got? as if it's a 0.36 I'd expect you to have around 160-180 hp at 18psi

[djinuk]

a .47 turbine housing,

t2 internals
with a t25 compressor housing and wheel
and a 360 degree thrust bearing.

[Logg]

Thats good as the .36 would be at it's limit at 180hp. not too sure what the limit of the .47 is but fingers crossed it will be a bit more.

These two articles should help give you an idea of what could be achived.

https://www.rtoc.org/boards/showthread.php?t=14

https://www.rtoc.org/cgi-bin/leader_board.cgi

Also remember to have a good s**t before you run and less fuel= less weight too.

[5alldaway]

in the 14s easy babe

and when is this drag day? i may get the pug out for this one

[djinuk]

cheers for that log.. Its not till oct alex, although its over a sat/sun so could be aight, be a good time to get the 205 out.. btw i had a call from bretby yesterday (big bretby), hes purchased a 309 gti and is dropping a gti6 in,.. going to be lots of them running around very good i think :P

[5alldaway]

bretby???

what you saying about pugfest at the end of the month? im looking to get a nice bbq going and the pug going up that hill quite a few times