Results 1 to 3 of 3
  1. 15-06-2011, 21:07 #1
    boysie
    boysie is offline
    Non-member boysie's Avatar
    Join Date
    Sep 2009
    Location
    huddersfield
    Posts
    263
    Post Thanks / Like

    finding TDC

    I got a b18ft from haz with no cam in it,

    i have since picked up a cam but not sure how to find tdc to fit the cam,since tdc marks are on the cam pully

    is there a mark anywere else?

    i did read about removing sparkplug and cranking engine till you feel a suction but doesnt sound very accurate.......
    Reply With Quote Reply With Quote
  2. 15-06-2011, 21:14 #2
    SCHWARTZ
    SCHWARTZ is offline
    Non-member SCHWARTZ's Avatar
    Join Date
    May 2009
    Location
    Wallington south london
    Posts
    3,102
    Post Thanks / Like

    Re: finding TDC

    there is a mark on the crank pulley, also there is a plug at the front of the engine if you remove this a rod can be inserted into the crank when at tdc
    Reply With Quote Reply With Quote
  3. 15-06-2011, 21:56 #3
    Guv
    Guv is offline
    Non-member Guv's Avatar
    Join Date
    Mar 2010
    Posts
    44
    Post Thanks / Like

    Re: finding TDC

    Have you still got your timing belt protective cover? Theres a square cut out on this cover with a pointer on it, you line the cam pulley up with that.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules