then I stripped her out fitted cobra buckets and that’s how she was for a while, power wise?? I dnt knw ktec set it up for 18psi on a t25 but I don’t trust previous owners so I turned the boost down for now to bout 10 psi well within what a standard carb can cope with. Then I hit some boosting problems at 2k comeing on boost it would splutter n nearly cut out, I swapped the modded carb for a standard one of my raider and it sorted it but again turned boost down to bout 8 psi
some plonker had fitted a surfboard to the front of the bumper so I removed, and added a ctm open mouth grill which looks wired in a pinky gold flip, and decided to go fmic.
Should help the little ones cooling issues the got some hard boost pipes but still haven’t got round to getting my silicones yet. This is how she sits atm moment, well sort of anyway
After a hard night at work ive decide on my color scheme
Main body and centre of wheels will be ford panther black
All brackets and various other stuff and outer lip of wheels will be Chrysler sbe
Along come some Renault 21 txe discs 285
And the brackets to suit
Freshly painted in the color of choice
Only to find the calipers catch on the edge of of my rims, so that mod is on hold for now and standard go back on for now
Which brings me to this week if started to strip the under neath ready for painting
Tank off
Going to be rplaced by a jaz fuel cell
Rear beam stripped and is at the powder coaters
As well as a lot of other bits n bobs
Got my first parts painted in the blue
And started stripping down another block for a rebuild with forged rods n pistons
More updates to come. Hope it’s a good read and don’t slate me to much
any way bit of an update nownt major. got the engine ready to come out just need to remove driveshafts and lift her out so hopefully next two days and thwe crack on with the wire wheel, oh the joys lol
and just took some pics of my top mounts freshly powder coated, springs i think are 40mm lowering and were red but that dosent come in with the color theme so the got blasted and redone in black
best bit is got charged 60 quid cos im a regular customer finish is top darts.
pics dont do justice to the qaulity
dont knw if this hub is a standard one never seen 1 like it b4 if it is
brackets for the brake hose on rear axel
bottom pulley needs to be modded for a triggerwheel
rear brakes
timing chain cover
front hubs
rear axel is now mint
wel best of all, or maybe not, thy powder coated the full sump, i dnt knw if this will be a problem?? but i came up trumps noticeing baffle brackets, after a bit of research the only come on cup cars and early pahase ones and a real rare.
wat a day dint tink i got much done yesterday, all repairs now on offside just need a final skim and got half the boot floor down to bare metal. should get the inside finished next weekend and maybe the underneath bare metaled
i do hate this stage tho seeing your pride and joy in this stage, espes when there no light at the end of the tunnel!!
got a block with just over 16 thousand on it, just got it back from been refaced, now going to get it painted and then forged hopefully before christmas i hope
also a coulpe of other pics of things to come
got my gt tunning rear strut brace today
and now started bare metaling the boot
bin a busy morning at work but managed to start painting bits off the car, more i see this color more i love it, hope its up to standard, should of got more pics but was stuck for time
rear apex shocks:
quick pic of the block but not finished yet
nitrous bottle
just got in and finishing picking underseal of my teeth
really happy, theres hardly any welding to do at the mo just a couple of patches for a e reg im over the moon
thats it up to now all comments and critasism welcome !!!!
the hub looks like a stndard one but with the cover removed. if you look closly you can see the renault stamp
really good work though and keep us updated
This is fantastic, nice to see someone putting the time in and not breaking a car! What paint did you use for the wishbones and suspension mate?
My friend has a standard Dimma front Bumper for sale if your interested. Needs a little work but not that much.
Ring 07875 470252 nd speak to Bruce if you are interested.
I saw this on passionfords... looks like a really good motor... i cant wait to see the progress.
yer i started it on passionford cos thats were i got all the insparation from if you see some of the cosworth threads the attention to detail is unbelivable and i want a shell thats mint.
i painted the new wishbones with wet on wet primer, max mayer base n with sikkens superior clear color is chrysler sbe. should soon have underneath and engine bay done.
hows this progressing? any updates???
the steering wheel hub is standard ph1 gtt, with the rubber shroud removed. mine is chromed....
i hope your powder coater removed all the shot blast material from the sump?
Wow perfect MAMBA
Feck me, that red/pink grille is from Dave Healy's old debacle! He spent a wedge making that car into a montrous, ill fitting heap about 6-7 years ago. Stayed in one piece for years, in fact I didn't know it had finally been broken up. The grille didn't fit right back then so good luck making it sit straight this time round. Lol.
looking good there,looks clean underneath,make sure you get some good
rust treatment in rear box sections an all in around where torsion bar fixes,
btw dont the dimma cars have it stamped on chassis??,cant remember?
top work
great project , i need to crack on with mine , keep up the good work
thats going back abitOriginally Posted by Trevhib
as for the grill not fitting properly, wasnt that more than likely due to his car being involved in a front ender? i recall even his morettes where sitting abit wonky too. may not be a grill issue.
Posting Permissions
Reply With Quote
