Does anyone know of anyone running a FMIC on an F7P conversion, Clio or GTT based,?
Just trying to get my head round if I can get the pipe run with my set up I have now, go CC or have to get a new intercooler with the outlets on the same side.
Ta
Steve
http://cgi.ebay.co.uk/Medium-65mm-2-...ht_1288wt_1139
thats the one i should have gone for but i got the one that was just too big
Steve, I think you will have to change intercooler matey as the pipe run will be very long as your turbo will be at the rear, as Gary, say's your going to need one similar to what he has prob grill mounted or where you have it now
Looking at a Focus RS Chargecooler set up on ebay at the mo... Pre rad is certainly up to it @ 900mm x 45mm & 160mmOriginally Posted by James5
Steve, I think you will have to change intercooler matey as the pipe run will be very long as your turbo will be at the rear, as Gary, say's your going to need one similar to what he has prob grill mounted or where you have it now
dont worry steve ive sorted it
http://cgi.ebay.co.uk/RENAULT-5-GT-T...#ht_500wt_1156
the one thats prittsticked on
New poster! (less than 10 posts)
Im running a FMIC on my f7p turbo.
I've gone for a twinpass rather than single.
I know I'll loose a little boost pressure but it's a compromise for ease of piping the thing in
Stick some piccies up if you have any
New poster! (less than 10 posts)
i shall steve when i get the thing plumbed in... im scratching my head myself at the minute !
but it is going to be ALOT simpler than single pass put it that way.
i was going to go down the route of buying the charge cooler kit from angel tuning (what was bb tuning i believe)
but they want 700 quid plus for the entire kit..
sack that
Turbo ted uses my old full-font intercooler with his F7P conversion. It is very tight, I think he has had to make a custom alternator bracket like I did with I had it with the F4R
OOO, is it up & running now then ?
I'll have to have a nosey round it as I was hoping to use my old one.
http://cgi.ebay.co.uk/Medium-65mm-2-...ht_1288wt_1139
thats the one i should have gone for but i got the one that was just too big
Fitted on my car with only a tiny bit of filling, i to went for the bigger one first then sent it back.
Pics im my profile i think
New poster! (less than 10 posts)
Fitted on my car with only a tiny bit of filling, i to went for the bigger one first then sent it back.
Pics im my profile i think
this is the one i have
i run a twin pass intercooler on my clio steve,.. its very tight.. had to take the pipework through into the arch and through there.
i had to remove the auxillery water pump (or relocate)
i know twin pass you loose a tiny bit of boost pressure but it was well worth it to save the headache !
Posting Permissions
Reply With Quote