Accelerator pump

[car.crash]

Can anyone link me to where the Article is for setting the acc pump jet please

[James5]

Don't think there is an article Mark, but to be honest it's simple to adjust:

• Remove the carb from the inlet manifold,
• Useing a 5mm drill bit (smooth end) place it in the throttle butterfly (you will see a slot in the base of the carb lay it along this),
• Let the butterfly rest against the drill bit,
• With the bit still in situ, you then adjust the acc' pump rod nut so that the pump lever is fully pressed in.

[car.crash]

Thanks James.

[James5]

Thanks James.

welcome