Innovate Motorsports DB and G Gauge kits.

[Penfold aka The Dealer]

Ok seeing as the club dont need to stock these no more we wont be, but i am going to give you the details on how to buy them.

"Kit Includes:
- Gauge
- LC-1 Wideband Controller
- Bosch O2 Wideband Sensor
- Bung/Plug Kit
- Software and Guide.

For tuners seeking the most cost-effective way to start monitoring Air/Fuel Ratio, the DB series gauges offer an attractive option, while opening the world of true digital data acquisition and software engine analysis. For example, users can add multi-sensor interfaces, and log 5 critical parameters directly into any PC or laptop. Or they can get a DL-32 data logger for hundreds of hours of 32-channel data logging on an SD card. Best of all, the DB gauges include the powerful LogWorks software for synchronous high-speed logging of wideband data, other MTS sensors, and data from a growing list of “piggyback” fuel controllers and standalone or factory (OBD2) ECUs. This is the same software used by champion engine builders and racers.

Note: The DB gauges have NO serial capability, and can only display AFR. For complete channel and color configurability, and for integrated remote-MTS button (calibrate, log start/stop), see the XD-16.



The price is £150 + P&P

You will need to contact
Graham Goode Racing
Tel : 0116 2440080
Contact Glen, tell him your from RTOC.

Paymant can be made my debit/Credit card or paypal.

[TomH]

New poster! (less than 10 posts)

This is a bargain, I was just wandering what size thread the sensor is, will it fit in the exhaust elbow tapped hole? I belive its an M12 although correct me if im wrong
Cheers

[Scoff]

oxygen sensor probe is M18x1.5mm

[Tiny Tim]

Chris,

Can we register some sort of dissatisfaction through the club? My unit has failed and i've given them MORE than enough oppertunity to put things right but now they're just ignoring my emails.

I know for a fact others in the club have had issues with them. Seems they're happy to make their profit out of us but the after sales service.. well, sucks donkey dick. I for one am NOT happy with them.

[Scoff]

tim,

I had grief with mine, I just posted it back with a note telling them it was kiboshed, they did nothing....... sent an email, nothing....

I rang them repeatedly a few days on the run after a couple weeks of inactivity. they were actually pretty helpfull then - I ended up paying the difference and ordering an LM-1 - they were nice enough to honor the discount on the LC-1 so infact I only payed the difference between full price LC-1 and the LM-1 which wasn't alot, 60 quid or something ?

get on the blower, they can't ignore that, they'll sort you out I rekon. I didn't even need to send up a receipt, I told them what date I'd sent them the paypal and they were happy with that.

[Penfold aka The Dealer]

Tim,

I was aware that there have been many problems with these gauges, i must admit we have had no problems with returns, as Scoff said keep chasing up via telephone.

Let us know how you get on.

Shoppers

[raj]

doesnt sound good,
are these problems model specific o the lc-1.?

i was going to buy an innovate kit but im not sure now.

is there no discount available on other models besides the lc-1.?

[djinuk]

bump, is there any discount on the other models?

[Adam L]

Looks like my LC-1 is knackered aswell, it's stuck on a permanent reading of 15. Although i'll check the wiring tomorrow before totally condeming it...

[MR TURBO]

Looks like my LC-1 is knackered aswell, it's stuck on a permanent reading of 15. Although i'll check the wiring tomorrow before totally condeming it...

Oh no dont say that!!! Back to limbo i go then as the lm-1 is unavailable so i have been told....

[raj]

seem to be a few iffy probs with these!

has/is anyone using any other brand of afr gauge/sensor.?

ive always like the look of plx devices gauge - http://www.plxdevices.com/products/dm200/smafrcombo/

[MR TURBO]

seem to be a few iffy probs with these!

has/is anyone using any other brand of afr gauge/sensor.?

ive always like the look of plx devices gauge - http://www.plxdevices.com/products/dm200/smafrcombo/

The DM-200 looks sick!!!!!

[raj]

The DM-200 looks sick!!!!!

how can you tell its poorly.? i think it looks great

[MR TURBO]

how can you tell its poorly.? i think it looks great

Lol

[dgdogz]

so are these a no no then?
i have been told by a few others they were good
i do want one so i can monitor and check that afr is all ok
?
cheers

[dgdogz]

anyone?

[Mudslinger]

didnt youngscottie have problems with his on the ayrshire rolling road ?

[dgdogz]

hello ppol

as no one is replyin and theres such a varied view of this im gonna just go ahead and get one

im going to contact GG tomorrow and see if there is any further discount if a couple is being purchased at the one go.

is anyone else interested in this?
thanks

[Penfold aka The Dealer]

Glen at GGR wont sell these for any less than the £150 to club members, alot of the kits have been fitted to members cars and are fine.

Remember GGR also sell these kits to the public and they are used worldwide.

[MR TURBO]

Glen at GGR wont sell these for any less than the £150 to club members, alot of the kits have been fitted to members cars and are fine.

Remember GGR also sell these kits to the public and they are used worldwide.

Does anybody know how many people bought these from the last group buy???

[dgdogz]

is the 150 inc or exc vat???

[Penfold aka The Dealer]

there £150 inc vat just got to pay postage.

The main group buy was something like 30 kits, also the club has sold a good 15+ since then... Also alot of people just went straight to GGR.

I would say there are a good 100 kits being used within this club...

[dgdogz]

klkl

sounds good im going to call them in the morning

[dgdogz]

hello ppol
i called glen this morning...as stated above the price is 150 inc vat and not including delivery
he does have stock now but as of monday the price will be increasing to around £169 or somewer in that region.
due to exchange rate and other costs he told me
is anyine else interested in buying one at this cheaper price????
there is 2 on the list right now

myself and mr turbo.

now is the time before they get more expensive

[MR TURBO]

Wahoo happy days i've just ordered mine will be with me tomorrow.....Glen is so great to deal with will defo shop with them agin and again and hopefully again!!! LOL

[dgdogz]

same..
get it on fri
yeehaa

glenns a top guy

mintedddddddd

[Barr's Irn-Bru]

same..
get it on fri
yeehaa

glenns a top guy

mintedddddddd

How do you like your lc-1 ? I bought mine with the first group buy ,Can,t complain does what it reads on the tin. Handy when hooked up to the laptop to see afr's recorded .Just remember you need the aux box for the rpm

[dgdogz]

hello matre
to be honest its not even in yet
its gettin done in a while along with a long list of other stuff
hahaha

[Theros]

New poster! (less than 10 posts)

What is their price now?

[MR TURBO]

New poster! (less than 10 posts)

What is their price now?

£158 all in delivered

[vas]

now £178.45 incl delivery since price change

[Adey aka Ewok]

anyone know if glen is willing to discount other products they sell?

[Penfold aka The Dealer]

anyone know if glen is willing to discount other products they sell?

Chat him up, Glen is a top bloke, mention me and i am sure he will do you a deal.

[Adey aka Ewok]

cheers me dears

[Adey aka Ewok]

yay, got me a nice new lm 2 on the way with discount, spoke to glen if anyone else wants one, i think its the new replacement for the lm 1

[MR TURBO]

yay, got me a nice new lm 2 on the way with discount, spoke to glen if anyone else wants one, i think its the new replacement for the lm 1

How much dude???

[Adey aka Ewok]

i think it was 202 plus vat and delivery

[Adey aka Ewok]

forgot to mention tho, if you want to log afr's vs rpm you will need a input cable, about £6 i think

[youngscottie]

didnt youngscottie have problems with his on the ayrshire rolling road ?

no problems infact mines been trouble free since install (about 1 year 2000miles)
when the car showed lean on the rollers the gauge was a little richer than the print out. as the rollers used inovate equipment i asked him to use my probe in the downpipe rather than his in the tailpipe 13.6 t/p 13.1d/p still lean

the only thing to give me pain is the led never worked for blink codes
bet it chucks it now ive given it the

[Greg Murch]

Hi Is this deal still on?
Also does any one have any pictures of this fitted please?