treating rust patches POR 15?

[philg]

I have read on hear about a product called por 15 i think. I have a bit of rust that need attention on the inside, alot of it looks like surface, but would like to treat it all properly.

Could someone explain how to use this por 15, it seems to come in different colours to. There seems to be a prep, remedy and degreaser.

I take it its a rub down, grind, treat the area, fill if necessary, prime then paint.

Anyone who has used this steer me in the right direction and what to buy.

Phil

[J$£5GTT]

this stuff makes me dribble..,yes its best to follow the step by step approach they suggest for best results,clean area first with the 'marine clean' (you mix it with hot water),dry out,then use the metal ready primer as they instruct,after that paint the por 15 on.

dont get it on you hands as other folk have found out......aint that right mr JRP !!

but well recommended this product is!!!

[philg]

so its then painted on with a brush i take it, then would i prime, then my white colour?

phil

[J$£5GTT]

so its then painted on with a brush i take it, then would i prime, then my white colour?

phil

yes a brush,id recommend cheapo thro'away ones,this stuff sets super hard!!!

as far as painting on top i think you may need a por 15 primer to get a nice finish,
then apply color of your choice,actually they do it in white !!!,clear,white and black,for all there product check-


http://auto.frost.co.uk/search?w=por+15

[JRP]

For best results you need the marine clean, and the metal ready... i found with out these the por dose not stick as well.

If you are to paint over the black por 15 you need the etch primer, then top coat.... although the finnish of the black por 15 is good enough,

Some examples of work...

https://www.rtoc.org/boards/attachmen...3&d=1248296644

https://www.rtoc.org/boards/attachmen...7&d=1248296571

https://www.rtoc.org/boards/attachmen...1&d=1248296571

[philg]

i will ring them on monday.

Anyone got any tips

phil

[JRP]

This is the best tip i can give

take note of this thread

https://www.rtoc.org/boards/showthread.php?t=7467

[J$£5GTT]

i will ring them on monday.

Anyone got any tips

phil

latex gloves an put a plastic bag or something between lid an can when finished or you will not get the lid back off again!!!...

[philg]

i had not though of doing the sub frame that look great, so i take it you used the 3 stage on that and the paint at the end was the black?

How would you tackle parts on the car that are going to be painted?


phil

[JRP]

i had not though of doing the sub frame that look great, so i take it you used the 3 stage on that and the paint at the end was the black?

How would you tackle parts on the car that are going to be painted?


phil

Best thing is to remove the parts, clean them with the special gear, treat with metal ready and the paint...

For arches etc wire brush first like loads... then use normal car shampoo and clean like a fecker... the marine clean them etc etc

[philg]

what size tins did you buy?

phil

[J$£5GTT]

i had not though of doing the sub frame that look great, so i take it you used the 3 stage on that and the paint at the end was the black?

How would you tackle parts on the car that are going to be painted?


phil

as jrp says clean,clean an clean again,as for parts that are going to be painted you may need this-


http://www.frost.co.uk/item_Detail.a...tSubcat=POR-15

i have only ever used an needed the black though,so you may need this for a different finish/paint.

[J$£5GTT]

they do a six pack which saves on waste.

[philg]

so get marine clean, metal ready, some white paint for the inside of car and under the front widow and any other paintable areas, followed by there primer. Do the sub frame, underneath of car with the first 2, then followed by the black paint, no primer needed.

Phil

[J$£5GTT]

bearing in mind that por 15 is not recommended on its own in daylight,its uv sensitive,tells you all about it on frosts for any technical info...
under car fine,but on top you probably going to need primer an alternative paint finish.

[JRP]

bearing in mind that por 15 is not recommended on its own in daylight,its uv sensitive,tells you all about it on frosts for any technical info...
under car fine,but on top you probably going to need primer an alternative paint finish.

you janky... top coat is not uv sensitive,,, but black por is, as thats not a top coat.... best to read web site

[J$£5GTT]

you mean the chassis coat?,thats not but por 15 black is.....

[David H]

I use this quite a bit on various projects. Here's a project of mine that I completed approx 4 years ago and the POR15 is still going strong:

http://www.griffith.pwp.blueyonder.co.uk/

Top tip; leave the tin upside down when you're done, this helps when you come to open the tin again (also, buy the small tins as suggested above).

[clee]

I remember seeing that project posted on the RAOC forum I think .Awesome work

[JRP]

I use this quite a bit on various projects. Here's a project of mine that I completed approx 4 years ago and the POR15 is still going strong:

http://www.griffith.pwp.blueyonder.co.uk/

Top tip; leave the tin upside down when you're done, this helps when you come to open the tin again (also, buy the small tins as suggested above).

David H after reading that and viewing those pics... i will publicly declare that i love you.

[David H]

Cheers chaps.

POR15 is good stuff, I'm tempted to try some of the Epoxy component paints though, something like this:

http://www.rust.co.uk/epoxy-mastic.cfm

[J$£5GTT]

I use this quite a bit on various projects. Here's a project of mine that I completed approx 4 years ago and the POR15 is still going strong:

http://www.griffith.pwp.blueyonder.co.uk/

Top tip; leave the tin upside down when you're done, this helps when you come to open the tin again (also, buy the small tins as suggested above).

im liking that !!

[J8TRO]

Wow, that brings back memories, Top work Fella. Body off resto is not an easy task.

[Kris M]

got to love the por-15

my old ph1 has had a fair amount of the stuff applied to it, still going strong

[GTphil]

The guy at frost told me not to bother with the marine clean and just to remove all lose rust then paint over.

I went a bit mad with the stuff did both sills and a couple of inches past them underneath, rear wheel arches where the kit goes over as they were starting to rust, all undernesth the rear bumper including the mounts(which amazingly where still there) the front cross member, inner wings, and a few inches inside the wheel arches both front and back and all the patches that I had welded inside the car. I did use some of the metal ready stuff for the fresh metal that was welded in

I was quite amazed at how the stuff sets it's like piss water when it's going on I came back the next dat and it was rock hard!

I too got it all over my hands and up my arms too took about 4 days for it to come off I tryed everything brake fluid, thinners, bleach, I found soap powder did the best job at removing it. However I still look like a secret goth or crossdresser as my nails are still black!

[philg]

right guys i wanting to buy this, they do a 6 pack off small tins 6x118ml or should i can buy tims of 473ml?

its for treating the inside of car, engine bay in grey, to paint white.

then subframe, arches, bits underneath in black

How much should i buy chaps? should i buy the 6 small tins in black and 1 meduim 473 for the grey inside?

phil

[JRP]

Start with the 6 small tins, then if you need more get more

[philg]

buy 6 of each then? grey and black

[philg]

got my por yesterday, 6 grey and 6 black, god are these for a model car, they are tiny tins.

Looks like i will be buying some more, i can not see these lasting long.


phil

[JRP]

little goes along way

[philg]

little goes along way

god i hope so

[Wallace]

Phil - if you can be arsed, take some pictures as you go, cause i'll be following suit in the coming months and a little "how to guide" Would be f**king awesome

[philg]

Phil - if you can be arsed, take some pictures as you go, cause i'll be following suit in the coming months and a little "how to guide" Would be f**king awesome

Will do, i have already started a thread in the restoration section