Results 1 to 6 of 6
  1. #1
    Non-member
    Join Date
    Mar 2009
    Location
    bungay
    Posts
    11
    Post Thanks / Like

    volvo b18ft conversion help!?? for those who've done one!!

    New poster! (less than 10 posts)

    i'm in the middle of doing the volvo conversion.. can anyone help with a couple of plugs and wires .. i simply cant remember where they were unplugged from!! for some reason i didnt label them as i did all the others!

    this multiplug near alternator



    and one the same near inlet



    and one eyelet in the middle... does this go to live or earth!?


  2. #2
    Non-member
    Join Date
    Mar 2009
    Location
    bungay
    Posts
    11
    Post Thanks / Like

    Re: volvo b18ft conversion help!?? for those who've done one!!

    New poster! (less than 10 posts)

    i've figured out where all these wires go... one is for reverse switch the other is a live for fuel pump relays. the one near alternator seems to serve no purpose..

    however i still cant get it to run.. i've connected thick grey wire to live. red/grey to fuel pump etc.

    if i put a little petrol in the inlet it fires right up..

    is there anyway of testing the injectors? also the fuel pump wont come on unless i put an earth on the bottom of one of the relays...

    anyone ?? i'm going out of my mind here!!

  3. #3
    Non-member dave r5's Avatar
    Join Date
    Aug 2009
    Location
    pitsea essex
    Posts
    584
    Post Thanks / Like

    Re: volvo b18ft conversion help!?? for those who've done one!!

    check yr tdc lead, the fuell pump wont fire untill it see's a signal

    also check your engine earths


    if no luck i have a loom or sale

  4. #4
    Non-member
    Join Date
    Mar 2009
    Location
    bungay
    Posts
    11
    Post Thanks / Like

    Re: volvo b18ft conversion help!?? for those who've done one!!

    New poster! (less than 10 posts)

    the bloody thing started first time this morning!! ran it for a while ... fine... went back to it half an hour later and it wouldnt go again.. so i'm thinking earth's or earth problem now.. which is the tdc lead? do you mean crank sensor?

  5. #5
    Non-member dave r5's Avatar
    Join Date
    Aug 2009
    Location
    pitsea essex
    Posts
    584
    Post Thanks / Like

    Re: volvo b18ft conversion help!?? for those who've done one!!

    yeah crank sencor

    disconect the ecus for a an hour then try

    coil paks are crap

    have u checked for water in the bores

    shody conection in wireing

  6. #6
    Non-member
    Join Date
    Mar 2009
    Location
    bungay
    Posts
    11
    Post Thanks / Like

    Re: volvo b18ft conversion help!?? for those who've done one!!

    New poster! (less than 10 posts)

    i've ordered a crank sensor and cleaned all the earths up.. it started today. got it warm.. all seemed fine.. started it a few times... no problem... left it for an hour or so.. nothing... the petrol i used in my makeshift fuel tank is rather old... so that may not help... i've not checked for water but it doesnt steam when running... once i've got the fuel pump plumbed in properly and a new fuel filter i think it'll be ok...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •