PDA

View Full Version : would any of these work for a r5 central locking?



gttjames
17-01-2013, 23:34
We all know a r5 plipper and receiver is pretty rare. But for people not fussed about it being 100% oe - would any of these kits be 'plug and play' and that way I could use a remote to unlock the 5 - rather than take a key close to the paint and unlock everytime

http://www.ebay.co.uk/sch/i.html?_from=R40&_nkw=universal+remote+central+locking&_nkwusc=universal+remote+central+locing&_rdc=1

Woznaldo
19-01-2013, 22:21
Any of the universal stuff will work well enough but, if they have some kind of anti-scan or key hopping function then that's better again.

gttjames
20-01-2013, 11:03
Thanks for reply, just hate unlocking my door with a key, over a few years itl soon get scratched up. So il get this as a plipper but not paying over £100 for a Renault item

w35ty
20-01-2013, 12:37
Iv got a unversal kit on mine mate with boot popper aswell got a new style flip out key with it aswell:cooter:

gttjames
20-01-2013, 20:23
Iv got a unversal kit on mine mate with boot popper aswell got a new style flip out key with it aswell:cooter:

sweet, so you think most on ebay should plug into the 5 with no wirring needed, just plug and go?

Woznaldo
21-01-2013, 11:35
They will all need some sort of wiring. If it just plugged in, it wouldn't be universal.

Nick k
21-01-2013, 14:10
Does your central locking work ok if you use the button on the centre console to lock/unlock it?? If yes then that kit should be ok.

Remember to wire it with positive lock/unlock locking pulse....

w35ty
21-01-2013, 23:26
To be honest mine was a abit of a pain in the arse had to wire the universal module to the original locking loom.. Worth it though!