View Full Version : would any of these work for a r5 central locking?
gttjames
17-01-2013, 23:34
We all know a r5 plipper and receiver is pretty rare. But for people not fussed about it being 100% oe - would any of these kits be 'plug and play' and that way I could use a remote to unlock the 5 - rather than take a key close to the paint and unlock everytime
http://www.ebay.co.uk/sch/i.html?_from=R40&_nkw=universal+remote+central+locking&_nkwusc=universal+remote+central+locing&_rdc=1
Woznaldo
19-01-2013, 22:21
Any of the universal stuff will work well enough but, if they have some kind of anti-scan or key hopping function then that's better again.
gttjames
20-01-2013, 11:03
Thanks for reply, just hate unlocking my door with a key, over a few years itl soon get scratched up. So il get this as a plipper but not paying over £100 for a Renault item
Iv got a unversal kit on mine mate with boot popper aswell got a new style flip out key with it aswell:cooter:
gttjames
20-01-2013, 20:23
Iv got a unversal kit on mine mate with boot popper aswell got a new style flip out key with it aswell:cooter:
sweet, so you think most on ebay should plug into the 5 with no wirring needed, just plug and go?
Woznaldo
21-01-2013, 11:35
They will all need some sort of wiring. If it just plugged in, it wouldn't be universal.
Does your central locking work ok if you use the button on the centre console to lock/unlock it?? If yes then that kit should be ok.
Remember to wire it with positive lock/unlock locking pulse....
To be honest mine was a abit of a pain in the arse had to wire the universal module to the original locking loom.. Worth it though!
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.