Horn Wiring

[Ashy]

Hello, Its a while since I had a Horn on my 5... Anyway just thought today I would try to get one wired up. Trouble is it was about 3 years ago when I removed the old horn and I can't remember what I did with the wiring for it? I might of just pulled it all out and binned it!

Can anyone post up a pic of where the original wiring is? Does it come through the inner wing or from the connector of death? I remember there being a relay on the compressor bracket so I guess I need to find a relay socket somewhere!

Could do with tracing it back somehow!

Cheers Ashy.

[Woznaldo]

This should help:

https://www.rtoc.org/files/Technical%...TIC%20HORN.JPG

[Ashy]

thanks, which plugs are the RH sidemember junctions?

[Ashy]

Anyone?

[Kris M]

Ashy, id say the dash sidemember junction would be one of the 3 big block connecters behind the drivers side kickplate ( down in the footwell)

Could be wrong though ???

[Nick k]

Ashy, id say the dash sidemember junction would be one of the 3 big block connecters behind the drivers side kickplate ( down in the footwell)

Could be wrong though ???

I know exactly where to look and which loom the horn wiring is connected too. But after the last time i tried to help a member with wiring, another members comments were uncalled for when i was wrong. So im not gonna bother...

[markey b]

drivers side crossmember loom is where it is on my raider, where it comes out behind the front member with the headlight wiring, i've not experienced a stock gtt yet, they've all been messed with, but i think my orange one goes across the front of the bay to the pass side where the relay is.
neither of my 5's have working horns, only one has a working speedo lol

[Ashy]

I know exactly where to look and which loom the horn wiring is connected too. But after the last time i tried to help a member with wiring, another members comments were uncalled for when i was wrong. So im not gonna bother...

Not sure why you bothered to post then?

[Woznaldo]

thanks, which plugs are the RH sidemember junctions?

R83 is a six pin connector (2 rows of 3) under the RH headlight.

R10 is a 13 pin connector (1 row of 7 and 1 row of 6 with a clip in the middle) under the RH side of the dash.

NO = Black
RG = Red
JA = Yellow
OR = Orange
BA = White

[Nick k]

Not sure why you bothered to post then?

Point Proven.....

I think RTOC should have more rep's like you posting and representing the club!

[dave j gtt]

Point Proven.....

I think RTOC should have more rep's like you posting and representing the club!

.

[dave j gtt]

surley this was in haste or as bit af joke .