Page 9 of 10 FirstFirst 12345678910 LastLast
Results 401 to 450 of 476
  1. #401
    Committee, South East Regional Rep James5's Avatar
    Join Date
    Aug 2002
    Location
    RH13
    Posts
    6,045
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Finished conversion but need to see what wheel alignment is like and where i need to add shims

    Name:  20170719_132019_resized.jpg
Views: 265
Size:  98.2 KB
    Name:  20170719_124336_resized.jpg
Views: 261
Size:  99.6 KB

  2. #402
    Committee, South East Regional Rep James5's Avatar
    Join Date
    Aug 2002
    Location
    RH13
    Posts
    6,045
    Post Thanks / Like

    Re: James5 with Yet another GTT

    front Jacking points on the 5 have deteriorated due to an old cage that was fitted and the holes not filled or sealed correctly so over time they have eaten away so getting them cut out and new jacking points fabricated and welded up. I also decided to get my rear tailgate badges refurbished again.

    Name:  20170719_143155_resized.jpg
Views: 263
Size:  153.5 KB
    Name:  20170719_132040_resized.jpg
Views: 263
Size:  108.0 KB
    Name:  20170708_123533_resized.jpg
Views: 262
Size:  214.9 KB

  3. #403
    Committee, South East Regional Rep James5's Avatar
    Join Date
    Aug 2002
    Location
    RH13
    Posts
    6,045
    Post Thanks / Like

    Re: James5 with Yet another GTT

    refurbed badge

    Name:  received_10158999728080716.jpg
Views: 268
Size:  66.8 KB

  4. #404
    Committee, South East Regional Rep James5's Avatar
    Join Date
    Aug 2002
    Location
    RH13
    Posts
    6,045
    Post Thanks / Like

    Re: James5 with Yet another GTT

    well thanks to Goobie for the bargain cage, and some mid jacking point replacement welding

    Name:  20170720_213200_resized.jpg
Views: 259
Size:  106.1 KB
    Name:  20170720_154928_resized.jpg
Views: 253
Size:  91.9 KB
    Name:  20170720_154938_resized.jpg
Views: 257
Size:  91.2 KB
    Likes Goobie, tubbyG liked this post

  5. #405
    Committee, Moderator Matt Cole's Avatar
    Join Date
    Sep 2008
    Location
    Durham
    Posts
    5,259
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Welding looks good. I need to finish my other 5's welding this year.

  6. #406
    Super Administrator R5MJH's Avatar
    Join Date
    Feb 2011
    Location
    Down South
    Posts
    3,865
    Post Thanks / Like

    Re: James5 with Yet another GTT

    lucky i didn't get cage absolute bargain
    Likes James5 liked this post

  7. #407
    Non-member Goobie's Avatar
    Join Date
    Mar 2002
    Location
    East Sussex
    Posts
    1,670
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Quote Originally Posted by R5MJH View Post
    lucky i didn't get cage absolute bargain
    James is a top guy, it's gone to a good home.
    Thanks James5 thanked for this post
    Likes R5MJH, James5 liked this post

  8. #408
    Super Administrator R5MJH's Avatar
    Join Date
    Feb 2011
    Location
    Down South
    Posts
    3,865
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Quote Originally Posted by Goobie View Post
    James is a top guy, it's gone to a good home.
    you are too

    wish ya got your fecking 5 done james just rebuilt a red 5 and sold in 2 months from scratch
    Just needed paintwork but that was it goobs

    remember we are here to help and local to YOU!!!!
    Thanks James5 thanked for this post
    Likes James5 liked this post

  9. #409
    Member Woznaldo's Avatar
    Join Date
    Sep 2008
    Location
    Canberra, Australia
    Posts
    1,914
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Awesome work on the 172 hub conversion. I too have had all the parts for a while now (six years I think?). I saw a Swiss guy do the conversion first and thought, as you have, the benefits are well worth the effort.

    I'm planning on a wide track front too, so I'd probably space the stub axles out to match the front at the same time.
    Likes James5 liked this post

  10. #410
    Committee, South East Regional Rep James5's Avatar
    Join Date
    Aug 2002
    Location
    RH13
    Posts
    6,045
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Some more update pic's, jacking point welding all done, just need to seal and that, going to get the cage brackets welded into the car tomorrow

    Name:  20170721_100258_resized.jpg
Views: 248
Size:  173.7 KB
    Name:  20170721_142324_resized.jpg
Views: 249
Size:  156.6 KB
    Name:  20170721_142317_resized.jpg
Views: 253
Size:  145.2 KB
    Name:  20170721_100309_resized.jpg
Views: 249
Size:  107.1 KB
    Likes Goobie, Woznaldo liked this post

  11. #411
    Non-member Goobie's Avatar
    Join Date
    Mar 2002
    Location
    East Sussex
    Posts
    1,670
    Post Thanks / Like

    Re: James5 with Yet another GTT

    How you get on with the door trim? Do the bars clear it?

  12. #412
    Committee, South East Regional Rep James5's Avatar
    Join Date
    Aug 2002
    Location
    RH13
    Posts
    6,045
    Post Thanks / Like

    Re: James5 with Yet another GTT

    I had to loose the front door lower pockets. I just need to put thbcage back in now I've had all the brackets welded in. Just going to spray them all up before i put cage back in and carpet down
    Likes Goobie, Matt Cole liked this post

  13. #413
    Non-member Goobie's Avatar
    Join Date
    Mar 2002
    Location
    East Sussex
    Posts
    1,670
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Remember, - Pictures or never happened!
    Likes James5 liked this post

  14. #414
    Committee, Moderator Matt Cole's Avatar
    Join Date
    Sep 2008
    Location
    Durham
    Posts
    5,259
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Gonna do the 172 front hub swap at some point. May as well do the same at the back!
    Likes James5 liked this post

  15. #415
    Committee, South East Regional Rep James5's Avatar
    Join Date
    Aug 2002
    Location
    RH13
    Posts
    6,045
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Quote Originally Posted by Matt Cole View Post
    Gonna do the 172 front hub swap at some point. May as well do the same at the back!


    I was tempted with the front as I have all that also but was concerned with what I would need to do to get all the camber correct. At present I just run valver similar hubs to gtt just big bearings and abs ports

  16. #416
    Committee, Moderator Matt Cole's Avatar
    Join Date
    Sep 2008
    Location
    Durham
    Posts
    5,259
    Post Thanks / Like

    Re: James5 with Yet another GTT

    It's making new drive shafts James that bothers me. I cant be bothered! Are you using longer shafts and wishbones with the 16v hubs? I would do straight bolt on stuff if that was possible?

  17. #417
    Committee, South East Regional Rep James5's Avatar
    Join Date
    Aug 2002
    Location
    RH13
    Posts
    6,045
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Quote Originally Posted by Matt Cole View Post
    It's making new drive shafts James that bothers me. I cant be bothered! Are you using longer shafts and wishbones with the 16v hubs? I would do straight bolt on stuff if that was possible?
    Valver hubs are the same length as the gtt ones :-) only difference is abs rings. I forget you use the meg box

  18. #418
    Committee, Moderator Matt Cole's Avatar
    Join Date
    Sep 2008
    Location
    Durham
    Posts
    5,259
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Yeah I'm using gt hubs though. So if the valver hubs are same apart from bigger bearing I might get a set and swap over.

  19. #419
    Ireland Area Rep turbo ted's Avatar
    Join Date
    Sep 2008
    Location
    Ireland Co. Kilkenny
    Posts
    645
    Post Thanks / Like

    Re: James5 with Yet another GTT

    You should use 172 hubs and 172 driveshaft cv as there a lot stronger than the Gtt shafts cv, as the 172 spline cv are bigger too,

  20. #420
    Ireland Area Rep turbo ted's Avatar
    Join Date
    Sep 2008
    Location
    Ireland Co. Kilkenny
    Posts
    645
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Quote Originally Posted by James5 View Post
    Some more update pic's, jacking point welding all done, just need to seal and that, going to get the cage brackets welded into the car tomorrow

    Name:  20170721_100258_resized.jpg
Views: 248
Size:  173.7 KB
    Name:  20170721_142324_resized.jpg
Views: 249
Size:  156.6 KB
    Name:  20170721_142317_resized.jpg
Views: 253
Size:  145.2 KB
    Name:  20170721_100309_resized.jpg
Views: 249
Size:  107.1 KB
    James where did you learn to weld that looks spot on👍

  21. #421
    Committee, South East Regional Rep James5's Avatar
    Join Date
    Aug 2002
    Location
    RH13
    Posts
    6,045
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Few more pic's now cage is fully in, few mods to carpet and interior plastic's to allow it to all fit nice

    Name:  20170724_142304_resized.jpg
Views: 232
Size:  123.9 KB
    Name:  20170724_094225_resized.jpg
Views: 234
Size:  71.4 KB
    Name:  20170724_094206_resized.jpg
Views: 235
Size:  76.7 KB
    Name:  20170724_094159_resized.jpg
Views: 239
Size:  118.3 KB
    Name:  20170724_094145_resized.jpg
Views: 238
Size:  117.0 KB
    Likes Goobie liked this post

  22. #422
    Committee, South East Regional Rep James5's Avatar
    Join Date
    Aug 2002
    Location
    RH13
    Posts
    6,045
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Final pic for today


    Name:  20170724_142248_resized.jpg
Views: 240
Size:  176.2 KB
    Likes Goobie liked this post

  23. #423
    Non-member Goobie's Avatar
    Join Date
    Mar 2002
    Location
    East Sussex
    Posts
    1,670
    Post Thanks / Like

    Re: James5 with Yet another GTT

    It looks the business in there!

    I see ya used the Allen bolts, looks a lot tidier with them.
    Likes James5 liked this post

  24. #424
    Committee, Moderator Matt Cole's Avatar
    Join Date
    Sep 2008
    Location
    Durham
    Posts
    5,259
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Looking great James. Some cage that. Are you happy/safe with your harness connection to the bar?

  25. #425
    Committee, South East Regional Rep James5's Avatar
    Join Date
    Aug 2002
    Location
    RH13
    Posts
    6,045
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Cage is awesome am well happy with the straps being in the brace, they are properly welded in place and the bar is solid.

    Just had my retrieve badges back and now fitted, it's coming on nicely just need to replace the gearbox now as pod made it really noisey on idle. I have a spare box to go in just the lack of time.

    I'll upload some pics later
    Likes Matt Cole liked this post

  26. #426
    Committee, South East Regional Rep James5's Avatar
    Join Date
    Aug 2002
    Location
    RH13
    Posts
    6,045
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Well the time has come to sell the car on I fancy a change for now so this will be up for sale in the next few weeks

  27. #427
    Committee, South East Regional Rep James5's Avatar
    Join Date
    Aug 2002
    Location
    RH13
    Posts
    6,045
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Another change to the gtt
    Had my bonnet louvred in places I wanted

    Name:  20170821_105450_resized.jpg
Views: 197
Size:  125.0 KB
    Name:  20170801_202343_resized.jpg
Views: 203
Size:  119.0 KB
    Name:  20170801_202357_resized.jpg
Views: 196
Size:  56.4 KB

  28. #428
    Moderator
    South East Regional Rep
    LiamR's Avatar
    Join Date
    Dec 1998
    Location
    Medway, kent
    Posts
    1,344
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Looks good. Where did you get that done mate? Was it pricey?

  29. #429
    Committee, South East Regional Rep James5's Avatar
    Join Date
    Aug 2002
    Location
    RH13
    Posts
    6,045
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Quote Originally Posted by LiamR View Post
    Looks good. Where did you get that done mate? Was it pricey?
    The guy that used to run the company cool louveres back in the day lives in Crawley he kept all the equipment and does it on the side now cost me £140 and you can have the louveres in different sizes where ever you want. (i had it sprayed elswhere)


    Name:  20170823_203043_resized.jpg
Views: 188
Size:  163.5 KB
    Name:  20170823_163534_resized.jpg
Views: 189
Size:  178.2 KB
    Name:  20170821_105419_resized_1.jpg
Views: 192
Size:  143.0 KB
    Likes tubbyG, Karlos, kial liked this post

  30. #430
    Moderator, Committee Trevhib's Avatar
    Join Date
    Sep 2008
    Location
    Derby
    Posts
    5,829
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Looks really well
    Likes James5 liked this post

  31. #431
    Moderator
    South East Regional Rep
    LiamR's Avatar
    Join Date
    Dec 1998
    Location
    Medway, kent
    Posts
    1,344
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Love the louvred bonnet look! I did have one quite a few years ago but sold it. They are subtle and functional. Really suits your car 👍
    Likes James5 liked this post

  32. #432
    Committee, Moderator Matt Cole's Avatar
    Join Date
    Sep 2008
    Location
    Durham
    Posts
    5,259
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Name:  20170420_203335.jpg
Views: 180
Size:  146.8 KB
    Likes James5 liked this post

  33. #433
    Committee, South East Regional Rep James5's Avatar
    Join Date
    Aug 2002
    Location
    RH13
    Posts
    6,045
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Attended a small meet today meet a couple of other GTT's

    Name:  20170827_134929_resized.jpg
Views: 176
Size:  166.4 KB
    Name:  20170827_135007_resized.jpg
Views: 175
Size:  135.8 KB
    Name:  20170827_134830_resized.jpg
Views: 178
Size:  177.2 KB
    Name:  20170827_134822_resized.jpg
Views: 177
Size:  160.3 KB
    Likes Matt Cole, tubbyG liked this post

  34. #434
    Committee, South East Regional Rep James5's Avatar
    Join Date
    Aug 2002
    Location
    RH13
    Posts
    6,045
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Small update decided to get the car mapped again, had to stop mapping at 364bhp @21psi mapper said my cams needs dialling, in said loads more still to give but wants the cams done before goes further. Should be back for mapping again in the next few weeks.

    No major changes other than plate change really, injectors and exhaust manifold are going to be holding the setup back

    Name:  20171018_141737_resized.jpg
Views: 157
Size:  128.5 KB
    Name:  20171014_105544_resized.jpg
Views: 155
Size:  149.9 KB
    Name:  20171011_181422_resized.jpg
Views: 155
Size:  114.4 KB
    Likes tubbyG liked this post

  35. #435
    Non-member tubbyG's Avatar
    Join Date
    Dec 2010
    Posts
    1,074
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Excellent numbers Nice to see you still making improvements to it.

    What gains are you expecting once the cams are dialed?
    Likes James5 liked this post

  36. #436
    Committee, Moderator Matt Cole's Avatar
    Join Date
    Sep 2008
    Location
    Durham
    Posts
    5,259
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Love it James!!

    Could the mapper not adjust your cams? Shame really as you have adjustable pulleys. I run VVT on mine and have an adjustable exhaust cam. The idea being i can adjust the ex quickly when the VVT is engaged for optimal lift.
    Likes James5 liked this post

  37. #437
    Committee, South East Regional Rep James5's Avatar
    Join Date
    Aug 2002
    Location
    RH13
    Posts
    6,045
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Quote Originally Posted by Matt Cole View Post
    Love it James!!

    Could the mapper not adjust your cams? Shame really as you have adjustable pulleys. I run VVT on mine and have an adjustable exhaust cam. The idea being i can adjust the ex quickly when the VVT is engaged for optimal lift.
    Cheers, unfortunately he wouldn't touch the cams :-( getting them dialled in next week, one of my friends runs a local Alfa Romeo garage and has the equipment to dial in so is going to do it next week, hopefully get it back up for mapping in the next few weeks

  38. #438
    Committee, South East Regional Rep James5's Avatar
    Join Date
    Aug 2002
    Location
    RH13
    Posts
    6,045
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Quote Originally Posted by tubbyG View Post
    Excellent numbers Nice to see you still making improvements to it.

    What gains are you expecting once the cams are dialed?
    It's currently on low boost we are going to keep going until the injectors max out or the exhaust manifold holds it back

  39. #439
    Non-member Goobie's Avatar
    Join Date
    Mar 2002
    Location
    East Sussex
    Posts
    1,670
    Post Thanks / Like

    Re: James5 with Yet another GTT

    That’s some result James! Triple the standard cj1 power and still chasing for more, lol.
    Likes James5 liked this post

  40. #440
    Committee, South East Regional Rep James5's Avatar
    Join Date
    Aug 2002
    Location
    RH13
    Posts
    6,045
    Post Thanks / Like

    Re: James5 with Yet another GTT

    I have built something which is a little easier to get hold of parts now, still fully forged including a forged crank this time around. Base engine is a phase 1 172, (big port head)

    Name:  27072503_10155594490468600_4496028593355782596_n.jpg
Views: 106
Size:  65.9 KB
    Name:  26907254_10155583315268600_2405344857117179375_n.jpg
Views: 107
Size:  74.4 KB
    Name:  26992623_10155581492293600_8307724047415431344_n.jpg
Views: 107
Size:  91.1 KB
    Name:  27336955_10155612490068600_4342318045366211403_n.jpg
Views: 107
Size:  77.6 KB
    Name:  27541143_10155612490238600_6077466223872043049_n.jpg
Views: 105
Size:  76.0 KB
    Name:  27458950_10155612490678600_4496021187377789309_n.jpg
Views: 108
Size:  66.7 KB
    Name:  27657325_10155612490768600_2739823932406563701_n.jpg
Views: 105
Size:  60.7 KB
    Name:  26992245_10155581492228600_6256013776358173666_n.jpg
Views: 106
Size:  60.4 KB
    Likes tubbyG, Matt Cole liked this post

  41. #441
    Committee, Moderator Matt Cole's Avatar
    Join Date
    Sep 2008
    Location
    Durham
    Posts
    5,259
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Nice bit of f4r power James!!!

  42. #442
    Committee, South East Regional Rep James5's Avatar
    Join Date
    Aug 2002
    Location
    RH13
    Posts
    6,045
    Post Thanks / Like

    Re: James5 with Yet another GTT

    More of a mental note for me this really -

    The 172 / 182 VVT setup is a simple on / off system, therefore on the 420d / 440 universal ecu's you just setup and aux output based on RPM (no wastegae functions is required), I will add the VVT details shortly

  43. #443
    Committee, Moderator Matt Cole's Avatar
    Join Date
    Sep 2008
    Location
    Durham
    Posts
    5,259
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Quote Originally Posted by James5 View Post
    More of a mental note for me this really -

    The 172 / 182 VVT setup is a simple on / off system, therefore on the 420d / 440 universal ecu's you just setup and aux output based on RPM (no wastegae functions is required), I will add the VVT details shortly
    Yes although i trigger mine on MAP.

  44. #444
    Committee, South East Regional Rep James5's Avatar
    Join Date
    Aug 2002
    Location
    RH13
    Posts
    6,045
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Quote Originally Posted by Matt Cole View Post
    Yes although i trigger mine on MAP.
    You using the map2 function? any more details or screenshots from WARI as to how? Is the VVT on f4r 225 as the f4r 172 / 182?

  45. #445
    Committee, South East Regional Rep James5's Avatar
    Join Date
    Aug 2002
    Location
    RH13
    Posts
    6,045
    Post Thanks / Like

    Re: James5 with Yet another GTT

    First start, still using my F7 map with no mods, no exhaust, no icv fitted. not even got timing gun out yet either

    https://youtu.be/g9rZVPC1jBQ
    Likes Matt Cole, tubbyG liked this post

  46. #446
    Committee, Moderator Matt Cole's Avatar
    Join Date
    Sep 2008
    Location
    Durham
    Posts
    5,259
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Quote Originally Posted by James5 View Post
    You using the map2 function? any more details or screenshots from WARI as to how? Is the VVT on f4r 225 as the f4r 172 / 182?
    I trigger the solenoid on aux out , roughly at 85kpa. I use a 172 head James mated to a 225 block and run lower compression. It's to try and get my big blower spooling. I also run a 197 exhaust cam.
    Likes James5 liked this post

  47. #447
    Committee, South East Regional Rep James5's Avatar
    Join Date
    Aug 2002
    Location
    RH13
    Posts
    6,045
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Well it's up and running currently done 79 miles on the car, doing aload of mapping myself will book on the pro mapper to finish it off.

    Even added a splitter to the GTT (Already caught it twice)



    Name:  29542091_10155733368363600_73542242275796188_n.jpg
Views: 101
Size:  90.1 KB
    Name:  29497144_10155733368628600_111886967849173119_n.jpg
Views: 102
Size:  83.3 KB
    Name:  flame2.jpg
Views: 102
Size:  90.4 KB
    Name:  29542936_10155733368428600_3310540609641457219_n.jpg
Views: 102
Size:  64.1 KB

  48. #448
    Non-member tubbyG's Avatar
    Join Date
    Dec 2010
    Posts
    1,074
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Awesome 👍

    Another great install James. What have you done to retain the standard bonnet?

    I picked up a full 182 engine this week to strip and rebuild for a turbo conversion, so any pointers will be welcomed
    Likes James5 liked this post

  49. #449
    Committee, South East Regional Rep James5's Avatar
    Join Date
    Aug 2002
    Location
    RH13
    Posts
    6,045
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Hi only had to modify the front engine mount itself to lower the engine 30mm, this gave me enough clearance for OE bonnet to fit, downside is that engine mount is solid and i can eel it through the car, all the other mounts are vibra jobs.

    You will need to back convert the 182 to phase 1 inlet of get a phase 1 TB and drill and tap the phase 2 inlet to accept it. Then you can have cable throttle. Quiet a straight forward conversion, dephaser and belt are easy don't let anyone scare you that they are a pain, you do need the correct tools though, oh and change the crank pulley to the megane 225 version as it has woodruff key. All pulley on the 172 / 182 are just floating (Scary thought really)

    Wish I had taken a pic of the bottom end open as I run a forged crank in this engine aswell

    Name:  27752166_10155612490433600_4618554988407748421_n.jpg
Views: 98
Size:  62.4 KB
    Likes tubbyG liked this post

  50. #450
    Ireland Area Rep turbo ted's Avatar
    Join Date
    Sep 2008
    Location
    Ireland Co. Kilkenny
    Posts
    645
    Post Thanks / Like

    Re: James5 with Yet another GTT

    Quote Originally Posted by James5 View Post
    Well it's up and running currently done 79 miles on the car, doing aload of mapping myself will book on the pro mapper to finish it off.

    Even added a splitter to the GTT (Already caught it twice)



    Name:  29542091_10155733368363600_73542242275796188_n.jpg
Views: 101
Size:  90.1 KB
    Name:  29497144_10155733368628600_111886967849173119_n.jpg
Views: 102
Size:  83.3 KB
    Name:  flame2.jpg
Views: 102
Size:  90.4 KB
    Name:  29542936_10155733368428600_3310540609641457219_n.jpg
Views: 102
Size:  64.1 KB

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •