This is what am up to a bit of jap crap lolstep one then
then
then a little later
and then a little bar for chute
Then spent a lot of time sorting thing out for the states
This is what am up to a bit of jap crap lol
Now for a bit of shiny **** to make it go faster.
they was lots of work done to the block fully sleeved bored honed etc should be good for 4 bar of boost
this is going to be another wallet burning engine build
i gather your going for the 9's this timeor dare i say 8's
hope it all goes well for you
mines a chicken jalfrezi and with 4 bar boost it better still be bloody warm when it gets here!
Love these civics, can't stop watching all the Yankee vids on YouTube. Looking good so far
Mental.
Absolutely mental.
Up to about £5000 on engine at the moment lol my bed room is full of new parts are lass is having a fit carbon bonnet and boot inlet engine parts waste gates etc all new learning curve but got a lot done in a short time 9s should be ok to start going for about 800 to start with then we will see how I get onOriginally Posted by HAndy
this is going to be another wallet burning engine build
i gather your going for the 9's this time
hope it all goes well for you
you seem to have removed all the nice bits from the inside of your car and fitted some builders pipes?
or am I missing something ;-)
Your welcome to them lolyou seem to have removed all the nice bits from the inside of your car and fitted some builders pipes?
or am I missing something ;-)
Ricer
will you enter it into next years show n shine...., blimmey you dont hang about glen... should go ok id a thought....
What for judge ? After this years do I think not wind up merchantwill you enter it into next years show n shine....
Hahaha Glenn 'the mad ****'. 4 bar of boost and plenty of gas.
No gas pal but will be on race fuel the new fwd class for 2013 looks very good (joined hks and esc in one class) sounds ace carnt wait should be good year for fwd cars
Be a good year that's for sure
Love it... i was struggling to keep my mouth shut for much longer aswell...
Lol cars coming on ok starting to build engine next weekLove it... i was struggling to keep my mouth shut for much longer aswell...
Had a start on engine today
Yes building it in the kitchen lol
Those pistons should be framed and put up on the wall! Well tastey!
What compression will you be running mate its looking good love that ur doing in kitchen bet the mrs loves it
9.0.1 Should be ok
I really like these civic turbos i would love one do you have any idea on what sort of power u are hopeing to achive theres a nice one on ebay 600 hundred odd horsepower with a 10k rev limit
A lot more than that between 800 to a 1000 bhp everything I have specked for the engine had a 1000hp in mind
Thats silly BHP!!!! but fair play to you
Bloody hell a 1000 bhp lol fairplay that should make it quite nippy lol will it be road legal
Oh yes but you won't be able to use it all but A good laugh 800 will do to start with if me ans scoff can get 470hp out of a 1.4 am sure we can make some good power
I held one phil and they are perfection.. And the block is as very serious as it looks this is Definatley a crazy machine in the right hands I personnally haven't seen something as crazy as this..Those pistons should be framed and put up on the wall! Well tastey!
Last edited by Nottswoody; 18-11-2012 at 19:07.
Nice work Glen hope it works out well for you, any idea on what turbo you are using?
Gt 42 twin scroll
Nice
Cylinder head all done cost a fortune big spec cams double spring ti top caps ti keepers fancy valves fancy guides and stem seals easy way to spend £3000
Cylinder head all done cost a fortune big spec cams double spring ti top caps ti keepers fancy valves fancy guides and stem seals easy way to spend £3000
ouch £3000!!! bet it will be well worth it
Busy busy
looking good glen progress seem to be moving quickly in the right direction.got to ask though i know your building the lump in the kitchen but you aint just sprayed the shell in the conservatory have you
If I could I would lol units are too cold getting old lol
Getting
Jokes a side, looking good mate won't be long now..
Got to get done as much before are lass drops that will **** the job up
Lol.
Must admit I always wanted to do a big power Honda FWD car, that's why I bought the crx.. O well maybe in my next life lol
It needs to go like this on first outing
http://www.youtube.com/watch?v=ZKjpmf1aI14
Check the incar at 2:10 , it's something else.
mint 9.0 will do palIt needs to go like this on first outing
http://www.youtube.com/watch?v=ZKjpmf1aI14
Check the incar at 2:10 , it's something else.
Hi glen.. Wheels fit great bud
What wheels and tyres will you have there's some serious slicks on the Americans civic on that clip.
yep 25 or 26 in tall 9in wideHi glen.. Wheels fit great bud
What wheels and tyres will you have there's some serious slicks on the Americans civic on that clip.
That is incredible!It needs to go like this on first outing
http://www.youtube.com/watch?v=ZKjpmf1aI14
Check the incar at 2:10 , it's something else.I can't help but think he's merely just a passenger in that thing!
I wonder what sort of g's he's subjected to?
I like the snap to the left top en of thirdThat is incredible!
I wonder what sort of g's he's subjected to?
bring it on carnt waitI like the snap to the left top en of third
The Americans will be watching you next year
Laughing no dowt thinking wot is he trying to do there the masters over there
On there short/down hill tracks they are
Some more boring photos for you mr reed
New engine mounts came today
Posting Permissions
Reply With Quote
