Results 1 to 44 of 44
  1. #1
    Non-member m5tt's Avatar
    Join Date
    Oct 2009
    Location
    Colchester
    Posts
    239
    Post Thanks / Like

    Thumbs up Re-introduction

    Hi everyone ,

    Would just like to re-introduce myself

    I have been a member before, how ever my job seriously restricted any further envolvement
    In the club and my membership expired.

    But am back lol

    Quick bio update;

    I Don't currently have an r5gtt, as over the past 12 months I've paid out nearly £9000 on my wedding that's in October, anyhows the wife to be has indeed given me the green light to purchase the 5 in the up coming months before Christmas!. Happy days!.

    Any ways just wanted to say hi again! Look forward to some, good chats, banter and help!

    Matt
    Last edited by m5tt; 03-09-2012 at 19:06.

  2. #2
    Non-member ChrisGT's Avatar
    Join Date
    Jul 2012
    Posts
    32
    Post Thanks / Like

    Re: Re-introduction

    New poster! (less than 10 posts)

    Welcome back mate, Ive only been on here a few days so bit strange welcoming somone! Have fun.

  3. #3
    Non-member Karlos's Avatar
    Join Date
    Apr 1999
    Location
    Leeds
    Posts
    414
    Post Thanks / Like

    Re: Re-introduction

    Welcome back matey

  4. #4
    Non-member m5tt's Avatar
    Join Date
    Oct 2009
    Location
    Colchester
    Posts
    239
    Post Thanks / Like

    Re: Re-introduction

    Thanks guys! How comes I have a thumbs down on my thread? Am I that bad already ? Haha

  5. #5
    Non-member Brigsy's Avatar
    Join Date
    Sep 2008
    Location
    Redcar
    Posts
    4,138
    Post Thanks / Like

    Re: Re-introduction

    Welcome back mate

  6. #6
    Non-member m5tt's Avatar
    Join Date
    Oct 2009
    Location
    Colchester
    Posts
    239
    Post Thanks / Like

    Re: Re-introduction

    Cheers brigsy !

  7. #7
    Non-member BILLY-R5GTT's Avatar
    Join Date
    Aug 2012
    Posts
    317
    Post Thanks / Like

    Re: Re-introduction

    Welcome back mate

  8. #8
    Non-member Nottswoody's Avatar
    Join Date
    Feb 2012
    Location
    Nottingham
    Posts
    2,683
    Post Thanks / Like

    Re: Re-introduction

    Glutten for punishment?? welcome back do you have a 5 in mind? Phase1/2? Minter or work needed?

  9. #9
    Non-member m5tt's Avatar
    Join Date
    Oct 2009
    Location
    Colchester
    Posts
    239
    Post Thanks / Like

    Re: Re-introduction

    Quote Originally Posted by Nottswoody View Post
    Glutten for punishment?? welcome back do you have a 5 in mind? Phase1/2? Minter or work needed?
    Hey dude, yeah am actually looking at a long term project, I've had three 5 gt Turbos before. My aim is to restore a shell that's on the Brink of death and basicly revive it! I
    Love O.E but complete O.E isn't quite my cup of tea, so the aim is to create a 5 with a modern flair nothing majour, just subtle inputs. I have spoke very briefly with a tradesman on the forums about what he has in stock come november I hope that A shell will be on my drive way! Not overly fussed on the phase as both have potential that excites me!

  10. #10
    Committee Member Sparkie's Avatar
    Join Date
    Aug 2008
    Location
    Tipton
    Posts
    3,085
    Post Thanks / Like

    Re: Re-introduction

    Quote Originally Posted by m5tt View Post
    Thanks guys! How comes I have a thumbs down on my thread? Am I that bad already ? Haha

    sorted

  11. #11
    Non-member m5tt's Avatar
    Join Date
    Oct 2009
    Location
    Colchester
    Posts
    239
    Post Thanks / Like

    Re: Re-introduction

    Top draw! Thanks mate!

  12. #12
    Motech Tony Walker's Avatar
    Join Date
    Sep 2005
    Location
    Parkgate Cheshire
    Posts
    3,848
    Post Thanks / Like

    Re: Re-introduction

    Welcome back

  13. #13
    South West Regional Rep jesus in the seat of a 5's Avatar
    Join Date
    Oct 2004
    Location
    Somerset
    Posts
    3,298
    Post Thanks / Like

    Re: Re-introduction

    wellcome back matty... still usin the rather dashin photo..., good to hear your going to get another 5..., look forward to more postin....

  14. #14
    Non-member m5tt's Avatar
    Join Date
    Oct 2009
    Location
    Colchester
    Posts
    239
    Post Thanks / Like

    Re: Re-introduction

    Quote Originally Posted by jesus in the seat of a 5 View Post
    wellcome back matty... still usin the rather dashin photo..., good to hear your going to get another 5..., look forward to more postin....
    Haha I certainly am!

    Yep defiantly cant wait to get back into the groove!. How far away are you from Gloucester dude?.

  15. #15
    South West Regional Rep jesus in the seat of a 5's Avatar
    Join Date
    Oct 2004
    Location
    Somerset
    Posts
    3,298
    Post Thanks / Like

    Re: Re-introduction

    Quote Originally Posted by m5tt View Post
    Haha I certainly am!

    Yep defiantly cant wait to get back into the groove!. How far away are you from Gloucester dude?.
    about 40 mins my good friend.......

  16. #16
    Non-member m5tt's Avatar
    Join Date
    Oct 2009
    Location
    Colchester
    Posts
    239
    Post Thanks / Like

    Re: Re-introduction

    Quote Originally Posted by jesus in the seat of a 5 View Post
    about 40 mins my good friend.......
    Happy days! Am based in gloucester, for the next two years, so could be needing your knowledge and practical skills On my up And coming project over this next year! If your about matey

  17. #17
    South West Regional Rep jesus in the seat of a 5's Avatar
    Join Date
    Oct 2004
    Location
    Somerset
    Posts
    3,298
    Post Thanks / Like

    Re: Re-introduction

    Quote Originally Posted by m5tt View Post
    Happy days! Am based in gloucester, for the next two years, so could be needing your knowledge and practical skills On my up And coming project over this next year! If your about matey
    whenever possibile to help matty , consider it done, we have a few other knowledgable members nears also bud....., not too much problem to get together at some point im sure.

  18. #18
    Non-member m5tt's Avatar
    Join Date
    Oct 2009
    Location
    Colchester
    Posts
    239
    Post Thanks / Like

    Re: Re-introduction

    Well it sure would be good to meet a few of you!. Once the kids and wife have settled into our pad after the wedding, I would be more than willing to host a small gathering. Even more so on a saturday afternoon when the other half is out shopping.... with ''our money''

    Any hows kind regards to all those so far that have welcomed me

  19. #19
    Non-member m5tt's Avatar
    Join Date
    Oct 2009
    Location
    Colchester
    Posts
    239
    Post Thanks / Like

    Re: Re-introduction

    Advice required, Can any one help?!.

    Today I spent a short period of time down a yard that I know home
    A few "dead" Renault 5 gtt's,

    Now am after a "long term" project and one that I can start from scratch. However am looking for some structural advice, the one I have chosen is a D' reg electric blue and it's in a state the bottom of the rear quarter panel has had a blow. Before I get to deep into something that can not be fixed, I've listed some problem issues maybe you could help with ?

    can the R/Q panel be repaired?.
    The front end had some rust around and on the cross member! (behind the front bumper is that the right name?) Can this be replaced?
    Inner and outer sills?

    This car has stood in more or less the same place since
    2005 and probs before that. I've been offered this car at a very reasonable price and being a leccy blue one thought maybe just maybe I could with all your helps save this one

    Many Thanks! (ps sorry if this is in wrong place)

  20. #20
    Motech Tony Walker's Avatar
    Join Date
    Sep 2005
    Location
    Parkgate Cheshire
    Posts
    3,848
    Post Thanks / Like

    Re: Re-introduction

    Pretty rare colour. I'd personally say as long as the windscreen isnt rotten then go for it, pretty sure one of the rear quarters is still available, think its the pass side but not sure, you could allways cut the side out of a scrapped campus or something. front crossmember is easily repairable(mainly because its not visible so doesnt have to be pretty) theres a fair few fast 5s out there with no front crossmember anyway.... silly intercoolers lol.

  21. #21
    Non-member m5tt's Avatar
    Join Date
    Oct 2009
    Location
    Colchester
    Posts
    239
    Post Thanks / Like

    Re: Re-introduction

    Hey tony, just priced up the following

    New:
    Head light surround panel,
    Near & offside sill replacement panels
    Near & offside jacking points
    And two new wings ... All for a price of £500

    Given this and the price of the car together actually comes well under the original "budget" so to say. I know this is a million dollar question, but what sort of price do you think could be spent on having these panels done?.

  22. #22
    Motech Tony Walker's Avatar
    Join Date
    Sep 2005
    Location
    Parkgate Cheshire
    Posts
    3,848
    Post Thanks / Like

    Re: Re-introduction

    id bank on it needing inner sills too. Ashy does replacements, not sure if he still has or does them you'd have to ask. wings are easy, bolt on off yourself, front panels not too bad as it its the sills that take time, and you will probably find a few other little holes, rear chassis legs and rear axle mounting points tend to rot also the boot floor where it joins the inner arch is common, i'd say bank on 600 labour worst case? and you shouldnt be too far out? but prices will vary alot from place to place, you could probably find cheaper, and almost certainly dearer. Then depends if it needs paintwork. also depends what can be done with the rear quarter. your best bet is to get handy with a grinder/welder

  23. #23
    Non-member gtmatt's Avatar
    Join Date
    Jan 2009
    Location
    manchester,sale
    Posts
    2,144
    Post Thanks / Like

    Re: Re-introduction

    welcome back mate

  24. #24
    Non-member m5tt's Avatar
    Join Date
    Oct 2009
    Location
    Colchester
    Posts
    239
    Post Thanks / Like

    Re: Re-introduction

    Thanks matty

    Yeah Tony I am really considering this now I set aside a rolling shell budget of up To £1000 so this car + panels + labour will come only a couple of hundred Over so really tempted plus like you say it's a hard to find colour! Is there anything else to take into consideration with a car been stood that long, appart from the obvious breaks and suspension probably being Knackerd.?

  25. #25
    Motech Tony Walker's Avatar
    Join Date
    Sep 2005
    Location
    Parkgate Cheshire
    Posts
    3,848
    Post Thanks / Like

    Re: Re-introduction

    Not really, rear discs little dearer than norm as the bearings are pressed in them. Everything's still pretty cheap. You'l always end up spending more than you want to lol.

  26. #26
    Non-member m5tt's Avatar
    Join Date
    Oct 2009
    Location
    Colchester
    Posts
    239
    Post Thanks / Like

    Re: Re-introduction

    Ha yeah, I've spent a fair few unjustified pounds on some 5's before hand, So this is another reason why perhaps taking the bigger step here in buying a shell requiring some attention is not such a bad idea... I mean at least I know for sure there won't be any rot after I've replaced the affected area. The panels I've looked at are fixable, how ever like I say just that R/Q is my concern!

  27. #27
    Motech Tony Walker's Avatar
    Join Date
    Sep 2005
    Location
    Parkgate Cheshire
    Posts
    3,848
    Post Thanks / Like

    Re: Re-introduction

    my previous car was a camparse so i cut the rear quarter off that for my gt. wish id just converted the campus and got it painted lol

  28. #28
    Trader
    Nocturnal Developments
    Haz's Avatar
    Join Date
    Sep 2008
    Posts
    776
    Post Thanks / Like

    Re: Re-introduction

    Welcome back. Just had a breif read and it looks like your considering taking on a rotten project that needing both sills, both jacking points, a crosember, headlight panel and qtr repair and more than likely other bits and then paint. I presume you aren't taking on the work yourself? Personally, that ain't gonna be a cheap project, and that's before you get into what else it's gonna need after many years off the road. Either reshell into a campus or save for a bit longer and buy a better base to start with or I can't see it gettin finished, that's alot of work if you don't have the tools, even if it's 500 materials and 500 labour (which I doubt) thàts still a grand which could buy a better project and be further along with less time ànd effort

  29. #29
    Non-member m5tt's Avatar
    Join Date
    Oct 2009
    Location
    Colchester
    Posts
    239
    Post Thanks / Like

    Re: Re-introduction

    Quote Originally Posted by Haz View Post
    Welcome back. Just had a breif read and it looks like your considering taking on a rotten project that needing both sills, both jacking points, a crosember, headlight panel and qtr repair and more than likely other bits and then paint. I presume you aren't taking on the work yourself? Personally, that ain't gonna be a cheap project, and that's before you get into what else it's gonna need after many years off the road. Either reshell into a campus or save for a bit longer and buy a better base to start with or I can't see it gettin finished, that's alot of work if you don't have the tools, even if it's 500 materials and 500 labour (which I doubt) thàts still a grand which could buy a better project and be further along with less time ànd effort
    Cheers Haz!.

    To be fair, Ive spent some time pondering over the whole concept of this project. For obvious reasons the chance to rebuild and restore an electric blue was what attracted me. Yes in a frank way the shell is rotten. Perhaps just that little to much .

  30. #30
    Non-member m5tt's Avatar
    Join Date
    Oct 2009
    Location
    Colchester
    Posts
    239
    Post Thanks / Like

    Re: Re-introduction

    Just a few previous cars.
    Attached Images Attached Images

  31. #31
    Motech Tony Walker's Avatar
    Join Date
    Sep 2005
    Location
    Parkgate Cheshire
    Posts
    3,848
    Post Thanks / Like

    Re: Re-introduction

    There always worse than they look too....

  32. #32
    Trader
    Nocturnal Developments
    Haz's Avatar
    Join Date
    Sep 2008
    Posts
    776
    Post Thanks / Like

    Re: Re-introduction

    Not trying to put you off, just be realistic. There is always something suitable for a project, bare in mind if your planning oe, or close, then a ph1 could cost more trying to source and fit the usual good condition rare bits. Although restoring a car to how you want it is very appealing, the fun is driving it so most people only take on a project that severe if they have owned the car a while and attached, have all the gear to do the majority themselves or a decent budget to make it happen.
    Just find something in the colour you want with a joblist that is copeable, by all means push the boundaries and get involved but nothing worse than starting something and never get round to driving it

  33. #33
    Motech Tony Walker's Avatar
    Join Date
    Sep 2005
    Location
    Parkgate Cheshire
    Posts
    3,848
    Post Thanks / Like

    Re: Re-introduction


  34. #34
    Non-member m5tt's Avatar
    Join Date
    Oct 2009
    Location
    Colchester
    Posts
    239
    Post Thanks / Like

    Re: Re-introduction

    Hey Haz,

    Completely understand your advice and it's advice from yourself and Tony that have helped me realise that my decision was right to end any dealing with said car. I just think everything weighed in made me step back and ask can I commit ex amount of time in restoring something that I may never get to fully finish! Especially being in the forces I dunno whether am coming or going at the minute accommodation wise. Really hoping for a black 5GTT

  35. #35
    Non-member gtmatt's Avatar
    Join Date
    Jan 2009
    Location
    manchester,sale
    Posts
    2,144
    Post Thanks / Like

    Re: Re-introduction

    I bought a rust box 3 years ago for £600 pound I am still doing it now 3 years on ,parts have increased etc ,and time is an issue for alot of members but it was my option to buy a project.

    Speak to mike phase1 16v he will find you a project good luck

  36. #36
    Non-member m5tt's Avatar
    Join Date
    Oct 2009
    Location
    Colchester
    Posts
    239
    Post Thanks / Like

    Re: Re-introduction

    Just been posted to Colchester, just wondered if there was many RTOC'ers in colchester ?.

  37. #37
    Committee member
    Rats Nest Tuning
    Ashy's Avatar
    Join Date
    Aug 2008
    Location
    Durham
    Posts
    3,198
    Post Thanks / Like

    Re: Re-introduction

    Quote Originally Posted by Tony Walker View Post
    id bank on it needing inner sills too. Ashy does replacements, not sure if he still has or does them you'd have to ask
    Yup got plenty!

  38. #38
    Non-member m5tt's Avatar
    Join Date
    Oct 2009
    Location
    Colchester
    Posts
    239
    Post Thanks / Like

    Re: Re-introduction

    Good stuff , well if you guys are reading this, what's colchester like? Nights out ? Children friendly restaurants ?

  39. #39
    Non-member m5tt's Avatar
    Join Date
    Oct 2009
    Location
    Colchester
    Posts
    239
    Post Thanks / Like

    Re: Re-introduction

    Getting married in couple of hours !! Poo'ing my pants

  40. #40
    Motech Tony Walker's Avatar
    Join Date
    Sep 2005
    Location
    Parkgate Cheshire
    Posts
    3,848
    Post Thanks / Like

    Re: Re-introduction

    Good luck :-) it'll be the fastest day of your life. Congratulations

  41. #41
    Non-member m5tt's Avatar
    Join Date
    Oct 2009
    Location
    Colchester
    Posts
    239
    Post Thanks / Like

    Re: Re-introduction

    Big day, went so quick
    Attached Images Attached Images

  42. #42
    Moderator
    South East Regional Rep
    LiamR's Avatar
    Join Date
    Dec 1998
    Location
    Medway, kent
    Posts
    1,344
    Post Thanks / Like

    Re: Re-introduction

    Congratulations matey

    Now go get a 5 lol.

  43. #43
    Motech Tony Walker's Avatar
    Join Date
    Sep 2005
    Location
    Parkgate Cheshire
    Posts
    3,848
    Post Thanks / Like

    Re: Re-introduction

    Congratulations

  44. #44
    Non-member m5tt's Avatar
    Join Date
    Oct 2009
    Location
    Colchester
    Posts
    239
    Post Thanks / Like

    Re: Re-introduction

    Thanks guys! such a proud day, now just got to get the move to colchester next week out the way then , be looking at purchasing a 5GTT, not really in a rush , been a financialy challenging year!. Not sure what colour , kinda like tungy, haven't had that colour yet!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •