Inlet Manifold Water feeds

[Jimmy5]

Hi does anyone know the renault part number for the water feed inserts on the inlet manifold?

Ones on my R5 are completelly rotten.

I know CGB do a replacement brass set, but have heard you have to modify the brackets that go arounf them to make them fit.

Cheers

James

[michael tierney]

i dont know the number but make sure u can remove them before u order!! i find that a large vice-grips with sharp teeth is the best

[Jimmy5]

Ones just about broken off - well there isnt enogth left to connect a hose to.

[James5]

Ones just about broken off - well there isnt enogth left to connect a hose to.

Bypass the manifold coolant connections no harm will be done

[Jimmy5]

Currently thats the setup ive got. but with going OE under the bonnet id ideally like to be running the full standard setup.

[Alex]

I've got the CGB brass inserts and I don't remember having to modify anything. If I did it can't have been much!

[Bigfoot]

Currently thats the setup ive got. but with going OE under the bonnet id ideally like to be running the full standard setup.

I know that feeling having to bypass it due to the core plug sptting itself out. Wouldn't mind knowing about where to get these so can clean inlet manifold up nicely as well as replacing both core plugs

[markg]

Speak to Mike. Pretty sure he mentioned previously to me that he has the non brass inserts.

[phase i 16 v turbo]

Speak to Mike. Pretty sure he mentioned previously to me that he has the non brass inserts.

Yes, Thanks Mark I have the OE ones in stock.