Results 1 to 6 of 6
  1. #1
    Member clee's Avatar
    Join Date
    Sep 2008
    Location
    Derbyshire
    Posts
    4,412
    Post Thanks / Like

    LUK clutch

    Anyone had experience of these in general ? Are they well made ? Up to the spec ?
    I've spotted they list for GTA turbo and Atmo so that shows they know there is a difference

  2. #2
    Non-member Adam 005's Avatar
    Join Date
    Sep 2008
    Location
    Dorset
    Posts
    949
    Post Thanks / Like

    Re: LUK clutch

    Luo have been around for years.they have a good rep for replacement after market stuff

  3. #3
    Non-member UnstableCable's Avatar
    Join Date
    Sep 2008
    Location
    Auckland NewZealand
    Posts
    215
    Post Thanks / Like

    Re: LUK clutch

    I had a bought a luk flywheel and clutch to fit to my audi but when the garage fitted it and started up the car couldnt get any gears. Took it apart and found the clutch plate had seperated from the spline! Sent it back to Luk and got a full refund!

  4. #4
    Committee, Shop Manager, SE Regional Rep Bigfoot's Avatar
    Join Date
    Jan 2005
    Location
    Essex
    Posts
    5,735
    Post Thanks / Like

    Re: LUK clutch

    We sell some LUK clutches at work, we mainly sell their DMF though as we sell mainly sachs and national clutches. But not heard anything bad about LUK

  5. #5
    Trader
    GT Turbo Spares co.uk
    South East Regional Rep
    phase i 16 v turbo's Avatar
    Join Date
    Jan 2001
    Location
    Morden
    Posts
    2,952
    Post Thanks / Like

    Re: LUK clutch

    Not had good experiences with LUK. Cheap if that is what you want but didn't last very long.

  6. #6
    Member clee's Avatar
    Join Date
    Sep 2008
    Location
    Derbyshire
    Posts
    4,412
    Post Thanks / Like

    Re: LUK clutch



    So...... some good some bad .

    Got a couple of GTA turbos in next month for clutches .Trouble is there is limited aftermarket supply for turbo versions and Atmo I expect .They are around £130
    Renault list Valeo Ren25T @ £225 +vat and recommend you bin the release bearing and get another , £16 ....

    GTA owners tend to be a bit tight but won't want it doing twice ...rock and a hard place

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •