What does the brown wire second from the right do?
What does the brown wire second from the right do?
Wheres the switch for the landing gear phill shes looking good mate when do we get to see her run.
Very impressive Phil....................as i keep saying - Top Job
Am really looking forward to seeing it at one of the meets
Anymore progress yet matey??
Been away a bit lately fishing but I am back on it again this week coming will be trying to fire it up on Tuesday and if all goes well I will get the screen and exhaust fitted the next wee and then it should be pretty much ready for the Mot mate.
Best insurance quote so far is £680 fully comp witha guaranteed value of 10k
Well today felt a very emotional day but also a brilliant day as today for me was d day and I finally heard my car run for the first time since 2006 wooooooo hoooooo a small fueling problem to sort on the adjustable regulator as the engine was basically seizing up with the amount of fuel going in and I believe the fpr has been set from factory massively high as the pressure gauge was reading more than 9 psi on initial start and just flooding the engine to a stand still but hopefully now I'm well on cause to have the car finished by the end of this month
Will update more pics next week when the seats are in and interior completely finshed
well its been a while since i updated this thread but all is going well now with my car and i am so close now to having it finished and fit for the road
this is what i have left before its ready
adjust fpr as its over fuelling
have screen fitted on tuesday and fit wiper arm
get exhaust made and fitted
fit new snap off boss and s/wheel
adjust front coilovers and lower back of car
fit gaiter round gear stick
adjust gear linkage to get 5th gear
and finally check oil drain from turbo as it has a slight leak
and finally some pics of how it looks so far promise ill wash it soon
some more pics
some more pics and a few more to come
probably the last pics now till she is on the road a picture of me dads toy as well
thanks for looking
How much fuel pressure and what size needle jet are you running mate?
Phil Pic's look awesome matey, look forward to seeing it at the next surrey meet
amazing mate just amazing well done , cnt wait to see it in the flash ,keep good work up see u soon matt
How much fuel pressure and what size needle jet are you running mate?
this is my carb spec mate carb is only tempory for this year as it will be going efi end of this year early next year was meant to be done already but the body shop charged me more than expected and i had to spend the efi money
carb spec 27mm venturi
choke flap removed
butterfly half shaft
jet sizes
140 main jet
100 air corrector
125 screw-in boost enrichment jet
150 fixed boost enrichment jet
boost enichment spring adjuster bung removed
yet to use as this was built for me, i think brigsy my problem lies with the fpr as i forgot to set it and only noticed it flying past 9psi when it was to late as the car fired up instantly. Thank fully it flooded and shut off after 1-2 seconds of running so no damage should have been done to the bores will fire it up again on tuesday and let you know the outcome mate
cheers james for the comments mate really looking forward to getting the car to some meets now this year looks like i've timed it right with the weather at the mo
and mat cheers as well for the comments i know it gets frustrating mate trying to rebuild a car from a bare shell as its given me headache after headache but when i look at the car now i can feel why i wanted to do it so badly do try and get stuck back into yours mate and dont give up to help me i wrote a list of jobs i had to do and ticked them off one by one as i done it mate started with 188 jobs now down to about 5-6 small jobs do a list mate it does help
Ah i see mate, the carb wont like 9psi, drop it down to 4 psi for run in Getting there now though, on road for national day??
Ok some more progress made today but no pics yet fuelling sorted now on the fpr and the car is booked in to have the screen fitted and the exhaust made and fitted on Tuesday so that only leaves me to set the gear linkage tighten the font coilovers and check the oil drain from the turbo and then its all ready for Mot tax and insurance
Phill that looks really smart fella. Glad to see you sorted out the fueling you nutter cant wait to see this at the meet. Good luck bud
Ace cant wait. You gona let me take it out on track
Race you to being on the road
Just to add if my photobucket account asks for a password use - smellyfeet
Cheers again James for putting the videos up if only I new what technology is lol I will call you and let you know how getting the screen fitted goes tomorrow and will let you know if all goes well having the exhaust made and fitted tomorrow as well mate
Good work Phil not long left now.
Looks very nice indeed!!
Looks like both of ya will have yours done before mine gets done for the second time phill youre welcome to, break it you buy it tho
still more reliable than my c1j, well until the t28 went on anyway
Ok some more good progress today for me as I am now water tight with the new screen now fitted and I also took the car down on a flat bed to powerflow for them to make my exhaust the guy mark who made it is fantastic and I am really pleased with the outcome I'll upload pics now so should take about 20 mins I also have a video of it running now with the exhaust on so if I know how to do I'll put that up if not James can do it tomorrow lol
Cheers phil
here are the pics of the car on its way to have the 3" down pipe and exhaust fitted
a few more exhaust pics
some more
this is the link to a video of the car now running with exhaust on http://s853.photobucket.com/albums/a...t=ihuhi029.mp4
Last edited by philr5t; 04-05-2011 at 01:00.
Whats with the brake/fuel lines down the exhaust tunnel Phil, they aren't down there usually are they
A couple of update pics from Phil that he emailed me.
Another pic
You can't get much fresher than that! Not to sure on the round exhaust poking out the side but what a monster exhaust system it its!
Last edited by DaveMayGTT; 17-05-2011 at 14:55.