This maybe a stupid question!!!
Will a F7P head bolt onto a Volvo 1.7 turbo block, Think you all know where im going with this
Cheers.
This maybe a stupid question!!!
Will a F7P head bolt onto a Volvo 1.7 turbo block, Think you all know where im going with this
Cheers.
New poster! (less than 10 posts)
Yes it will, but don´t forget F7P engine has got combustion chamber, and B18FT not, I think you will end up with a very low compression engine.
Pedro
a b18ft head is flat
the na head has a squish area.
i was gona go down the same route but i think the c/r would be way to low
do it, and wack an extremely rediculess amount of boost through the engine to compensate for the extra low compression
try it with a 172 crank in?
no, it won't sorry. the oil galieries do not line up. I know of a 16v head for sale that has been modified to live on a volvo block, if you were interested. and, as p30esteves says, you have a chamber in the 16v head, and not in the volvo.
2l crank will foul in both blocks I think, or atleast it will in the volvo's.
the bore in the volvo is also smaller than the f7p - 1721cc vs 1764 (I think) with the same throw on the crank.
Ive got this whole spare volvo engine with turbo and everything. Some one needs to come round my house and make me do summat with it Else its just gunna sit there.
you could sell me the cam if you'd like