Results 1 to 6 of 6
  1. #1
    Non-member garya's Avatar
    Join Date
    Dec 2009
    Location
    clydebank
    Posts
    279
    Post Thanks / Like

    Help carb problems?

    Awryt guys right my dad took my carb of my car the other week to do a overhaul on it everything looked fine untill we took it for a drive.in 1st and second gear it boosts and drives fine but when i go into 3rd or 4th gear it wont go past 3000rpm but the turbo boosts fine. it seems as if there isnt eny fuel in the chamber or somthing i am not to sure its confusing me.eny ideas guys?

  2. #2
    Non-member Spooky's Avatar
    Join Date
    Sep 2001
    Location
    SW PMT HQ
    Posts
    2,289
    Post Thanks / Like

    Re: Help carb problems?

    Check to see if the a/c jet is still present.

    Just take the carb top off and you should see a small brass screw just before the aux & main venturis

  3. #3
    Non-member garya's Avatar
    Join Date
    Dec 2009
    Location
    clydebank
    Posts
    279
    Post Thanks / Like

    Re: Help carb problems?

    right guys think i have found the problem i think the hoses are round the wrong way the only problem is i dont no where they go does enyone have a picture of there carb so i can see where the correct hoses go thanks gaz

  4. #4
    Non-member
    Join Date
    Sep 2008
    Location
    Glasgow
    Posts
    580
    Post Thanks / Like

    Re: Help carb problems?

    This might help you a bit man(courtesy of James5) -
    https://www.rtoc.org/boards/attachmen...0&d=1248462838

    and

    https://www.rtoc.org/boards/attachmen...1&d=1248462838

    Hope this helps you


  5. #5
    Non-member garya's Avatar
    Join Date
    Dec 2009
    Location
    clydebank
    Posts
    279
    Post Thanks / Like

    Re: Help carb problems?

    awryt guys got the problem fixed. fuel supply filter on carb was around the wrong way.

  6. #6
    Non-member
    Join Date
    Sep 2008
    Location
    Glasgow
    Posts
    580
    Post Thanks / Like

    Re: Help carb problems?

    lol DOH! ..when i was stripping my carb down it didnt have a filter ..so luckily i had another carb which had a filter ..cleaned that up and put that on instead

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •