Results 1 to 12 of 12
  1. #1
    Member
    efi-parts.co.uk
    Scoff's Avatar
    Join Date
    Aug 1998
    Location
    Liverpool
    Posts
    4,558
    Post Thanks / Like

    Dual head monitors in Vista

    long story short, I used to run 2 monitors with an old ati radeon 7000 card under XP, worked fine. I went to Vista with the new machine a couple of years ago and didn't bother setting the dual monitors up.

    I want to run dual monitors again so got hold of another radeon 7000 knowing it worked OK before, only I can't find a sodding way to make it run in Vista - no drivers, not Vista compliant, usual crap..

    I've ordered an vNidia geforce 8400GS card and DVI adaptor, I think this should work OK. what I wanted to know is:

    anyone any experience of setting this lot up in vista ? I've downloaded the nVidia drivers from their website - should this lot include support for multi view / dual monitor setups ?

    anyone any idea how I might make the Radeon work in vista ? or should I give up on that completely.

    PS, I'm not a gamer, couldn't care less for GPU speeds and all that crap, I just need the desktop space!

  2. #2
    Non-member UNICRONICUS's Avatar
    Join Date
    Jun 2004
    Location
    Isles of Scilly
    Posts
    431
    Post Thanks / Like

    Re: Dual head monitors in Vista

    ATi should have the drivers on their website for that card, if not, try this site for drivers http://www.guru3d.com/. Both cards should support configuration for which monitor is primary and secondary so I can't see a problem with that. Being a Vista novice I wouldn't know where exactly to look.

  3. #3
    Member
    efi-parts.co.uk
    Scoff's Avatar
    Join Date
    Aug 1998
    Location
    Liverpool
    Posts
    4,558
    Post Thanks / Like

    Re: Dual head monitors in Vista

    I have tried already, it's written in a few places that Vista does not support the development of drivers for hardware it deems to old to work well enough!

  4. #4
    Non-member Andrew Cooke's Avatar
    Join Date
    Sep 2008
    Location
    Oxfordshire
    Posts
    3,160
    Post Thanks / Like

    Re: Dual head monitors in Vista

    Quote Originally Posted by Scoff View Post
    I have tried already, it's written in a few places that Vista does not support the development of drivers for hardware it deems to old to work well enough!
    which is 'microsoft' for bend over and touch your toes

  5. #5
    Trader
    GT Turbo Spares co.uk
    South East Regional Rep
    phase i 16 v turbo's Avatar
    Join Date
    Jan 2001
    Location
    Morden
    Posts
    2,952
    Post Thanks / Like

    Re: Dual head monitors in Vista

    Download windows 7 Beta and give it ago, if you get no joy with vista.

  6. #6
    Non-member Arrows's Avatar
    Join Date
    Apr 2004
    Location
    West Sussex
    Posts
    423
    Post Thanks / Like

    Re: Dual head monitors in Vista

    Quote Originally Posted by phase i 16 v turbo View Post
    Download windows 7 Beta and give it ago, if you get no joy with vista.
    Anyone running this at present?

    Whats your views?

  7. #7
    Non-member Mudslinger's Avatar
    Join Date
    Feb 2003
    Posts
    520
    Post Thanks / Like

    Re: Dual head monitors in Vista

    did u only install the display driver for the ati card or did u install the catylist driver?

    there is a set up section in the ati catylist to run dual monitors , ive only tried it once and done it with no probs and im running vista , i was not aware the op system would have a bearing on this ?

  8. #8
    Member
    efi-parts.co.uk
    Scoff's Avatar
    Join Date
    Aug 1998
    Location
    Liverpool
    Posts
    4,558
    Post Thanks / Like

    Re: Dual head monitors in Vista

    ah, now I read about the catalyst set, and came to the conclusion I needed the RC1 set, which I downloaded from ati. However, it says that it cannot find any suitable hardware installed in my machine, and does not list radeon 7000 in it's compatability list. I tried to learn which cards wetre supported by which catalyst suite, but got nowhere, fast. Or, 7000 is just not supported maybe. I came across someone on a forum claiming his worked with the 7200 drivers in vista, but I could not find 7200 drivers for vista either.

  9. #9
    Non-member Mudslinger's Avatar
    Join Date
    Feb 2003
    Posts
    520
    Post Thanks / Like

    Re: Dual head monitors in Vista

    Quote Originally Posted by Scoff View Post
    ah, now I read about the catalyst set, and came to the conclusion I needed the RC1 set, which I downloaded from ati. However, it says that it cannot find any suitable hardware installed in my machine, and does not list radeon 7000 in it's compatability list. I tried to learn which cards wetre supported by which catalyst suite, but got nowhere, fast. Or, 7000 is just not supported maybe. I came across someone on a forum claiming his worked with the 7200 drivers in vista, but I could not find 7200 drivers for vista either.
    it is a fairly old card tbh , the first pc i bought had a ati 9800 radeon card and that was in 2000, infact coming to thinkabout it i have an old ati x850 agp thats just lying there yours if you want it ? bit of a step up from the 7000

  10. #10
    Member
    efi-parts.co.uk
    Scoff's Avatar
    Join Date
    Aug 1998
    Location
    Liverpool
    Posts
    4,558
    Post Thanks / Like

    Re: Dual head monitors in Vista

    yes, it's oldskool, like me. I should not be suprised that it isn't supported, but still irritates me though

    I should have this nVidia geforce 8400GS thing tomorrow, still an older card but atleast supported by Vista, but if that fails to work also then I'll let you know ofcourse, would have to be dual head ? I think not all cards that have 2 monitor sockets are dual head ? I lost track of current PC architecture in about 1993 when everybody bought Windows

  11. #11
    Member
    efi-parts.co.uk
    Scoff's Avatar
    Join Date
    Aug 1998
    Location
    Liverpool
    Posts
    4,558
    Post Thanks / Like

    Re: Dual head monitors in Vista

    sorted! 8400GS card worked fine, and the drivers from nVidia's website worked fine too, it even came supplied with an "nVidia control panel" making it easy to setup multi displays

  12. #12
    Non-member dave j gtt's Avatar
    Join Date
    Oct 2007
    Location
    costa del walney Island NW
    Posts
    1,148
    Post Thanks / Like

    Re: Dual head monitors in Vista

    good work HaPpY dAyS

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •