he sold me a turbo for 230 and it didnt work try to talk to him and sort out the problem but will not reply
he sold me a turbo for 230 and it didnt work try to talk to him and sort out the problem but will not reply
Doesn't sound like spooky
You sure its spooky? what you mean it didnt work?? turbos dont just not work....
Run through how you fitted it. step by step
got loads of emails where i try to sort it out with him even said i send it back and let him have a look and see if he knows why its not workin still got it sitting here now
abs turbos put it on for me would not boost at all put my one with the seals gone boost fine and dave t2 off here one work fine
Did you chek for boost leaks? have evrything set.. its not far to big for your set up is it?
Maybe it sucked up some punctuation, which has got stuck and jammed the wastegate open!
its fine for my set up just want something sorted mate i gave the money with no problems and sitting here now with a turbo not workin and 230 short in my pocket feel a bit mug off if he would talk to me than could sort something out
i be glad to give it to anyone on here to look at it or even try it if ur turbo is on its why out but know u will have the same problem as i try it on my mates car to
Hopefully spooky will come on hear and we can here his side. What did abs turbos say about the turbo, mr breakdown
why is it people always take sides before hearing it all out. give the bloke a chance and let spooky box his own corner.
not got a problem with him just want it sorted dont want people taking sides just want it over and done with not trying to start trouble just feel mug off a bit since it comes across that hes not welling to try and sort it out with me
can you check the shaft please
A more in depth explanation as to what's happening would help. The fact ''it doesn't work'' means nothing.
I'm taking sides
Well, I'm taking a side. I'm going to take the left side, and put it on the right side, so then it becomes the wrong side
it dont boost at all with the turbo on as if its not got a turbo on the engine
does the shaft spin freely by hand ? doesn't look bent or catching the housings ? and is the wastegate closing all the way ?
what type of turbo is it ? it's not just laggier than you expect ?
if anyone on here got a blow turbo than ur welcome to try this one as it wont smoke its a t25
and the turbo i borrow of my mate at the moment is much bigger and is fine
If it's not boosting, the wastegate could be open prematurley and bleeding off the exhaust gas before it hits the turbine wheel. You just need to shorten the actuator rod in that case. The penny should be clamped against it's seat firmly
just spoke to abs turbo and he said he check the wastegate
that the rear blades could be the problem
ahh ok, so if you look in the back housing do the blades from the wheel look like the've scraped the sides? if you wiggle the back wheel does it get stuck on the housing sides?
Literally just replied...
Hi
I sold you a working, boosting turbo. It was literally taken off my car the morning I posted it out, it was still warm in the packaging!!!
I have offered to help and have given you advice on what to look at and try etc
Why would I sell something, of whatever value and know it didn't do what it's meant to do ?
I've sold numerous parts, body panels, engine parts, turbos...no one has had any issues and if they did, Ive usually helped them out as much as I could.
I don't know if you've been unfortunate enough to have had it damaged in the post or during any handling. That's something I can't control.
Sukhi
will have it all check again tomorrow by abs turbo would go now but leg is in plaster
Where are you in North London?
Just bring it down to our workshop in Brentford and i'll have a proper look at it.
nice one mate are u about thursday morning where abouts
Sounds like a group hug is due :P
If no obvious signs of damage and trying things already asked I would suspect actuator adjustment could be needed
DG
all of the above has been try will pop and see adam
As Mart has said Adam will look after you
You'll have to leave it with me if you come on Thursday morning as I won't have the time to look at it straight away.
cool will have some answers thursday i hope
okaymate pm with address
thanks adam
Me can't believe dat you is not on the .............