is it a wire from the ignition module?
is it a wire from the ignition module?
Yep, it's one of the wires (can't remember which one now...pink maybe?) on the 3-way plug/connector.
gray
as im having trouble and i think it feeds large black plug over the rev gauge and cable slot no.8 i think may change to a brown wire
The pink wire from the aei 3 pin plug.....letter C i think... ive seen these wires fade on some GTs but normaly its pink... the other two wires are 12v and earth so maybe use a tester if your colours are odd....
Nice find, will help me out alotOriginally Posted by Rob@Backyardracing
, thanks!
where would you wire in a rev limiter there??
J, the rev limiter connects to the positive and negative outputs on the coil ( IIRC)
They are two metal pegs on the side of the AEI, only one is just visible in the pic, just below and left of the supresser connection. To expose the other metal peg you have to cut away some of the plastic surround)
cheers mate you just got yourself a wiring job..J, the rev limiter connects to the positive and negative outputs on the coil ( IIRC)
They are two metal pegs on the side of the AEI, only one is just visible in the pic, just below and left of the supresser connection. To expose the other metal peg you have to cut away some of the plastic surround
DONE!!!
simpl;e innit
the three way plug has three wires . one is earth thats gotta be the black one
that just leaves two
so if the yellow wire is B+ with ign on that only leaves one
last one standing
anyone fancy a game of cludo
i recon it was pro plumb in the studdy with the lead pipe
Posting Permissions
Reply With Quote