When the flywheel is at tdc where should the rotor arm sit on my 5gt.Also did phase 1 have overboost protection, i have 3 wires going to relay in the scuttle next aei.
When the flywheel is at tdc where should the rotor arm sit on my 5gt.Also did phase 1 have overboost protection, i have 3 wires going to relay in the scuttle next aei.
Rotor arm should point almost directly towards the front of the car inline with the contact point on the distributor cap.
When at tdc the rotar should line up with the contact in the dizzy that supplies a spark to No1 cylinder.
Yeah, the phase1 has overboost protection, the sensor is in the turbo-intercooler hose.