New poster! (less than 10 posts)
If possible has anyone here fitted a screamer pipe on a c1j? Watched a vid of Andy Cooke's and it sounds like it has one, might be wrong though.
New poster! (less than 10 posts)
If possible has anyone here fitted a screamer pipe on a c1j? Watched a vid of Andy Cooke's and it sounds like it has one, might be wrong though.
I have seen one fitted to a five/c1j, it had a huge t3/t4 turbo if i remember correctlyOriginally Posted by Rusty
never got to hear it in action unfortunatly
I'm using a T25 Hybrid at the moment so not sure if it's possible to fit one.
Not really needed for a turbo like t25 mate,but is possible to fit one.
It is possible but the turbo will require the wastegate to be plugged,the exhaust manifold will also require fabrication to mount the external wastegate.
I'm in the process of having a manifold made up with a proper take off for an external waste gate, then on goes a screamer pipe
I'm in the process of having a manifold made up with a proper take off for an external waste gate, then on goes a screamer pipe
iz u man enuff?
What u mean, course I am............... well until the first time I kicked off a track for being to noiseyiz u man enuff?
i have one on mine
Lets see a picture theni have one on mine
will take one tomorrow morning , too dark at the mo
heres some pics just went and got some >>>
just for the sake of my ignorance
what is a screamer pipe and what are its benefits?
one hell of an exhaust note when its boosting
also got an external wastegate on mine,well its all ready to be bolted on i ended up using a k-tec manifold will post a pic tomoz
-
what does that support link (welded to the washer under the 13mm nut) connect to at the other end ? the bulk head ?one hell of an exhaust note when its boosting
yeah, because when it got hot, it would weaken the weld and fall off (the pipe) so we created a metal sleeve and then fitted the bar, only prob is i need to get a rubber piece for the bulk side as it can vibrate and make a loud noise, either that or get the bar connected to a different part of the engine maybe gearbox..?
its not welded btw the bar is just bolted on, put loctite on the nut so it doesnt come off
ok, but the engine moves on its mounts and the bulkhead does not, so your putting a lot of strain on that link. I thought that would be obvious, or maybe I'm not understanding what you mean, sorry. ?
either way any support link wants bolting to the engine or gearbox.
get a clip of your car up then.one hell of an exhaust note when its boosting
yeah thats what i thought a local garage done the work, only had the car for a fw days after but im going to get the link moved :P
Also will get a vid up as soon as only prob is my clutch is going and 2nd gear synchro is on way out so trying not to use it :S
heres a few pics of mine,still need the screamer pipe makeing and a few little bits and bobs sorting then i can bolt it all together,and then test it
^^ nice engine bay that
lovin the bay!
here a couple of my car with hks w/g and screamer pipe
this is what the screamer pipe sounds like:
same as oli, mine is in the 'pipeline' lol
just waiting on the fannymould to be perfected and some sunny weather so i tax it
just an observation... what with people puttin rad hoses on the end plate on the head?
maybe my ears are going but that just sounded like every 5 i've ever heard!?this is what the screamer pipe sounds like:
video doesnt really do it justice, guess you will have to wait till you hear it in the flesh
Just this min got in from a lunch time drive with a girl I know who own an 08' Subaru Sti.
They have a screamer fitted as standard.
That was one fast Jap wagon!
video doesnt really do it justice, guess you will have to wait till you hear it in the flesh
what exhaust do you have?
side exit
Posting Permissions
Reply With Quote
