Hello does any one know the correct size spacers I will need to fit some 15inch wolfrace voodoos on.
as they are catching on the brakes.
iv asked a few people and I keep getting I will have to try different ones what I see as a waist buying different spacers.
How bad is it catching? Have you thought about trimming a bit off the caliper?
If it were me and trimming the caliper wasn't an option I would make some test spacers, a bit of old hardboard or washers behind the wheel on the bolts ?. Keep adding these spacers and once it no longer catches measure the thickness of these test spacers and you have your answer. Obviously don't drive it like that
so whats catching the actual caliper on the alloy or the alloy weights catching on the caliper??
The calipper on the edge on the edge of the wheel . It's hard to explaine.
i will try and take a pic and up load it to my Facebook page for my car or add it on here.
im attempting to lower the torsion bar at the mo.
Torsion bar done!! Easy job lot more easy than gettting the old top mounts off the front.Originally Posted by redrocket29
I trimmed one with my dermal and I used a universal 5 mm spacer .
dont know if there any good I'm sure the nuts will be ok Iv only lost 5 mm
Posting Permissions
Reply With Quote