Hello Folks,
I had hoped that my local stealers had one in their treasure trove, but it wasn't
to be as they'd had a clear-out. So, now I have a tidy engine bay and clean
gearbox, I'd like to help keep it that way.
Regards,
Steve
Hello Folks,
I had hoped that my local stealers had one in their treasure trove, but it wasn't
to be as they'd had a clear-out. So, now I have a tidy engine bay and clean
gearbox, I'd like to help keep it that way.
Regards,
Steve
I could do with one too steve although I will not pay a ridiculous amount for a lump of plastic sheet.
I'm not sure I've ever seen one!? I'd be interested for me resto project too
I have fitted one on mine but I am 99% sure GT's never came with them fitted and their a retro fit from another model.
What happened was the mechanics doing the PDRs would remove them and notOriginally Posted by Gtturbo
replace them. Apparently, our local stealers had several of them in their loft, but
someone had a clearout and they went...
...to the dump
As for paying loadsamoney, what I might end up doing is getting one fabricated
from sheet aluminium, it might be a cheaper option.
BTW, if at some point you get the chance, it would be good to see a picture of
what it looks like in place and where its fixings are.
Regards,
Steve
There's definitely a thread about these somewhere with pics and discussion on fitment.
Will have a look around
Paul is right, these weren't factory fit on GTTs.
I might have an ask about other 5s//Extra/Clio 1s at the dealer.
A part # would be very useful Matt
Regards,
Steve
A couple of pics of the cover, I bought this off renault. Very simple to fit 4 bolts hope this helps.
Cheers Charlie
clarky_gtt thanked for this post
Nice one Charlie. Any idea of the part number? Wonder why the gt didn't have these fitted? Maybe heat.
I kept all my invoices so should have it, I will check and post asap. Not sure why they weren't on the turbo but nice job when fitted and no problems with over heating.
Some info in this
https://www.rtoc.org/boards/showthread.php?t=36662
Bang on again Graeme!
I searched yesterday on a few keywords. Guard and sump weren't in my list
Drat, as the other thread says, no listing for GTT's so no part number in our Dailogys section:
https://www.rtoc.org/boards/showthread.php?t=40475
They'll be a part number on that under tray.
The part number is 7700764094, i got this off the guard if needed i can look up the invoice.
...and they are still available from France...
Regards,
Steve
I'll update our Dialogys page
Edit - done: https://www.rtoc.org/boards/showthrea...107#post398107
Glad to be of help....and they are still available from France...
Regards,
Steve
Charlie
How much are they?
About £85 without the fixing kit - that's another £10 or so.
I think that #2 in the Dialogys system might be a bit better,
as that seems to have better drain hole positions. Not sure
how much they are - need a Part #...
Regards,
Steve
I've got a clio 172 one here not sure if that would fit needs a bloody good clean though
Any pics James?
172 phase 2 attached it's only held on in the corners with 10 mm bolts, the rest of it catches the lips of the subframe. The big hole in it allows access to the sump bolt
I think I only paid about £36 for mine, the fixing kit is only 4 speed clips and 4 bolts.
I've found some of these for sale.
They also come fitted on cars with two other sections over the wish bones.
Mike, thanks, I've had those pieces for ages. Happily I bought them before their
prices went astronomic
Having got the gearbox looking like a work of art, I'm hoping these pieces will help
keep it cleaner for longer.
Regards,
Steve
Posting Permissions
Reply With Quote
