-
Non-member
Locking the flywheel
Hi,
I need to lock the flywheel to change the bottom Pully but cannot see how i do this. People say put in a screwdriver to lock this but i cant see where i can get to it.
As you can probably telly i am not the best with a set of spanners but like to have a go. Could someone please explain (in detail) how i get to the flywheel to do this.
I was looking and i cant see an exposed bit.
Many thanks
Dan
-
Non-member
Re: Locking the flywheel
You lock the flywheel from the top through the hole where the box meets the block behind the intercooler where the tdc sensor is. Use a large flat bed screw driver insert it into the teeth on the flywheel and turn the bottom pully untill the screw driver locks it enough to undo it.
-
Non-member
Re: Locking the flywheel
I need to do this also as just bought a refurbed bottom pulley wheel, so thanks for your help.
-
Non-member
Re: Locking the flywheel
Many thanks for this.
Dan
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules