Reconnecting oem boost gauge

[fastevo1]

I'm assuming it's just a straight vac pipe to the rear of the cluster for this to work again?

I think the original feed was used for the aftermarket gauge.

[Brigsy]

Pipe goes from drivers side of carb top to o.e boost gauge.

[fastevo1]

Pipe goes from drivers side of carb top to o.e boost gauge.

Cheers

Does it enter drivers side or passenger side bulk head?

[LeeR5GTT]

Cheers

Does it enter drivers side or passenger side bulk head?

Drivers mate with the speedo cable

[fastevo1]

Drivers mate with the speedo cable

Cheers

[Chris Beer]

As above ..

There is a plastic connector on the bulkhead, if it's there but unconnected then run some vac hose to carb top and should be sorted

[fastevo1]

As above ..

There is a plastic connector on the bulkhead, if it's there but unconnected then run some vac hose to carb top and should be sorted

Don't suppose you have a pic or can point it out on another pic?

These Hayes manuals are useless!!!!!

[fastevo1]

As above ..

There is a plastic connector on the bulkhead, if it's there but unconnected then run some vac hose to carb top and should be sorted

Found it!

Cheers.

[Trevhib]

Take a pic and post it on here for future

[fastevo1]

Here we go, directly behind the carb coming from the bulkhead.

[Trevhib]

Nice one It's in an awkward little place