im getting really annoyed with my wiring in me car. im now thinking of taking the dash out to get this sorted.
ive looked on the articles section for an article on how to do so.
im sure i remember seeing one on the old site? maybe not though.
any advice or know how would be much appreciated cheers
why are you thinking of removing the dash?
is that really nessasary,what sort of electrical
problems are you experiencing?
to sort out the wiring behind it really.
well when i press my brake pedal my rear fog light on my dash comes on slightly. my handbrake light and clock all dim also when the pedal is pressed.
and now my oil pressure gauge is playing up.
cleaned all engine earths and replaced with new.
cheers
to me that does not sound to bad,i mean
nothing a decent qualified automotive
electrition could not sort out
thats what i would advise an then
job done my friend
Check the earths at:
The Battery
The Dashboard (On the side of the body in the footwell)
BOTH Rear lights.
would an automotive sparkie be expensive do you think?
just got a brand new battery. because mine was playing up.
is there one wire going in to this earth (The Dashboard On the side of the body in the footwell) ?
also i have cleaned up on of the rear lights earth. is there one on the other side?
i will have to clean the contacts on both connectors.
cheers
started to get the dash out today. broke both the side clips. are they available from renault does any1 know? and if so does any1 have a part no pretty please.
im up to the point where i neeed to start taking the steering rack out. and i couldnt see where the circlip is suppouse it was starting to get dark so any pointers to where that is would be much appreciated cheers
Yeah theyre avalliable
7700768723 89p each
i would of tried replacing the rear light clusters first
cheers steve. really adey how come?
Originally Posted by Adey aka Ewok
same here,something of sorts,theres no way id take the dash out
for something that trivial,i had a bunch of gremlins on my 5,had a mate
(auto electrical) an sorted it in half an hour.
lol it is a bit mad i no. but my wiring has always looked a mess behind it since ive had it.
what about if i was to try the car without the rear lights connected?
also on the passenger side of the car when i took the upper trim off i had a green wire running along to the back is this going to be an earth?
also i have got rid of my middle air vents and replaced them with dials.
is it possible to put the vents back does any1 know.
as when the dash is out i might put them else where.
cheers
ya light issues were most prob the rear lights, and the dodgy oil pressure gauge is probably the connectors on the sender... i have multiple lights, and senders here if you need any bits
when every1s been saying the rear lights do u mean the units them selfs?
ive got it out. need to do the steering wheel bushes any how or replace the rack. so that will make that easier with it out. might do the heater matrix aswell.
and im going to take all the sound deadning out.
will let you no markey cheers.
where the plug goes on the bulb holder bit, its prob all green and scabby on the connectors, or on the bulb side, from what you say when you press brake the brake light bulbs are earthing through another circuit, if that makes sense....
quick test....
flick on taillights and hazards, and stand behind car, see if the taillights go dimmer when the indicators illuminate, then get an assistant to press brake etc. etc.
another thing is clean the earths on the rear lights, or run an extra wire onto the black with a green stripe on the rear lights which is ya earth wire.
thought id put a pic up of the car with the dash out. stripping all the sound deadning etc out to.
also ive got another pic im putting up just woundered what it actually is of. think its something to do with alarm/immobilisor if any1 could shed any light cheers.
as one of the wires coming out of it leads coming out of it leads to nowhere and is not connected to anything and i had another one like this connected in there too.
and i cant see where the one whats connected up goes to cheers
better upload the pictures then
wow!! what a messbetter upload the pictures thenThat connector is not from the 5. yea i think its a old alarm loom.
yeah im not sure if its anything to do with the alarm and immobilisor on there now so dont no weither i can remove it will have to look into it more.
yeah its a wee mess lol will be fun to see if i can put it back together lol.
how you getting on then,i should just wrap it all in loom tape
an forget the dash
good luck with that lot mate!!better upload the pictures then
LOL, looking at that! a couple of lights on the dash would be the last thing on my mind......
I had this problem with an Astra once, all it was, was the wrong frigging bulb!
For instance Halfords sell the 380 bulb and 382 look identical but there not, I saw it loads at Halfords a few years ago, peoples brake lights come on when they idicate, turn on there headlights and rear lights turn off, all sorts of crap, dont know why it did/does it, but mine was giving them sort of problems and just turned out to be one bulb
Worth trying that for a few pence.......
havent touched it lol. bit skint at the mo. waiting for a m8 to buz a welder round just got a few bits to tidy up on the floor.
is loom tape any different to black insulating tape then?
yeah would be pretty cool to leave it out. not very practical though lol.
and the dash it self didnt really weigh alot considering the size of it. the sound deading i pulled out felt alot heavier.
yeah i no it seems a bit extreme taking the dash out. but ive always wanted to do it anyway really.
plus half the interior might not end up going back in for a bit lol
better upload the pictures then
Just doing a search on taking the dash out, as I wanted to tidy it up a bit, thankfully I came across this thread. Fook that
sorry where are my manners.
Goodluck
lol. lets hope i can get it back in properly with the loom all clipped in properly....
is loom tape any different to black insulating tape then?
yep if you get the 'non adhesive' variety its a joy to
use.
kool do u think any wilco/motor factors should have some?
ive just stuck a seat and the steering wheel back in hehe
Last edited by tom t; 15-01-2009 at 17:26.
Posting Permissions
Reply With Quote