job lot of 5 turbo parts £300 leicester

[joegtir]

i have a job lot of parts iv collected over the years and now i dont have any cars left its time to for someone else to make use of them or im going to scrap the lot and i dont really want to so i know everyones wants a list of everything thats in there but i just have time to go through it all so a rough guess at whats there , few dash boards, sets of clocks , interior plastics , looms , engines in bits, a drivers door , exhaust or two , old turbos, hoses , trims , red carpet , lights x10 sets maybe , orignal 13" 5 spoke wheel mint , full set of steals 13" , stearing wheels , gear knobs , relays boxes of them ! , hubs , stearing racks , suspention , intercoolers , glass , aei boxes , rubber seals x3 full car sets , clio 16v bonnet and wings , etc
there is im sure lots more than what i have wrote on here and if you know me and been to my garage you will know there is alot of parts there need them gone in the next few days if anyone is intrested 07591698351

[Dafydd52]

New poster! (less than 10 posts)

hi do you have injection manifold amoung them bits

[Penfold aka The Dealer]

New poster! (less than 10 posts)

hi do you have injection manifold amoung them bits

At a guess I would say only 10 people have an injection Manifold for the c1j.... If they come up for sale there normally up individually, not part of a job lot....

Michael Tierney makes manifolds for people so worth PM'ing him....

There is a romour going around that there is a Renault Manilfold available for around £50... (Absolute Bargin) but nobody has yet released the Part details....

[Dafydd52]

New poster! (less than 10 posts)

oh rite, will do cheers. how hard is it to convert???

[Penfold aka The Dealer]

New poster! (less than 10 posts)

oh rite, will do cheers. how hard is it to convert???

There's a reason why many haven't done it....

Although there is enough info on here, it's do able, cost are coming down...

[Matt@CodeRedMotorsports]

There is a romour going around that there is a Renault Manilfold available for around £50... (Absolute Bargin) but nobody has yet released the Part details....

Its just a Renault alliance manifold (American spec R5).

[Penfold aka The Dealer]

There is a romour going around that there is a Renault Manilfold available for around £50... (Absolute Bargin) but nobody has yet released the Part details....

Its just a Renault alliance manifold (American spec R5).

But that's not the one u can order from Renault is it?? Or is it?

[Matt@CodeRedMotorsports]

Can't remember, looks like this?

[Matt@CodeRedMotorsports]

Or like this.

[Matt Cole]

At a guess I would say only 10 people have an injection Manifold for the c1j.... If they come up for sale there normally up individually, not part of a job lot....

Michael Tierney makes manifolds for people so worth PM'ing him....

There is a romour going around that there is a Renault Manilfold available for around £50... (Absolute Bargin) but nobody has yet released the Part details....

If its the manifold I think your talking about , then it's not from a Renault!

[Andy M]

If its the manifold I think your talking about , then it's not from a Renault!

Fiat???

[Sparkie]

skoda fabia 1.4 mpi 8v perhaps.....

[Miller]

That's the one Sparkie, I got one last year for £8 to see if it would fit and it does. It's about and 2 hours work with a saw and file, it will fit in the engine bay......... Just tight on the servo.

I have taken pictures of the manifold as I altered them. I will be using it on my 5 and believe will be able to do my full conversion for under £450 including the ecu (Megasquirt) with me doing all work.

It just at the bottom of my list of things to do just now. I will try and get a thread together to show what other efi parts can be used to keep costs down.

Cheers
Chris

[Matt@CodeRedMotorsports]

That's the one Sparkie, I got one last year for £8 to see if it would fit and it does. It's about and 2 hours work with a saw and file, it will fit in the engine bay......... Just tight on the servo.

I have taken pictures of the manifold as I altered them. I will be using it on my 5 and believe will be able to do my full conversion for under £450 including the ecu (Megasquirt) with me doing all work.

It just at the bottom of my list of things to do just now. I will try and get a thread together to show what other efi parts can be used to keep costs down.

Cheers
Chris

Hehe! Nice.

[Sparkie]

my missus has got a 1.4 8v fabia, and i've changed the headgasket on a few - easiest HG to do - pushrods, no turbo, no siezed bolts etc etc . there are a few scrap places round here that sell bits for em.

[Miller]

You can also use the same manifold from the skoda felicia, it's best to use the fuel rail from the felicia as the FPR is built into it where as the fabia must be in the tank...... So it's one less thing to buy.

[joegtir]

hahaha sorry not one in there was one for a sr20det but all gone now

[royz]

You can also use the same manifold from the skoda felicia, it's best to use the fuel rail from the felicia as the FPR is built into it where as the fabia must be in the tank...... So it's one less thing to buy.

throttle body of a clio 172 fits with very little work as i am also going down this route.

[Miller]

What size is the throttle plate on the 172?

[royz]

ill mesure it up tomorrow takes about 10 mins to get it to fit. you have to enlarge one of the holes and file back some of the metal so the butterfly dose not foul on it. ill get a few pics and send them to you.

[elcie]

Hows the racing going, smashed anymore windscreens?

[Matt Cole]

throttle body of a clio 172 fits with very little work as i am also going down this route.

Megane 2.0 n/a also fits. I think they are the same as a 172 anyhow.

[Miller]

You need to watch the size you go for!

Emmas car has a 50mm throttle body and I find anything over 1/2 to 2/3 throttle and and it makes no difference to throttle response. I am going to use a 45mm one this time.

Chris

[Brigsy]

Any pics of the manifold? I think i need to get myself one

[joegtir]

Hows the racing going, smashed anymore windscreens?

hahaha no not been out in it next race is april 13/14 snetterton so just smahing the rear quarters in on the bimma in till then

[elcie]

Haha, sweet. what BM you got then?

Is your mate taking the Focus to CSCC tin tops next year?

[joegtir]

Haha, sweet. what BM you got then?

Is your mate taking the Focus to CSCC tin tops next year?

Just a 325i saloon at the min she slides well but m3 power is on the way , focus will be out for snett just having a rebuild at the min