Re: Danny's progress pic's

**DK DEVELOPMENTS** · 30-09-2009, 20:05

A few pic's of my rad fitted to the bottom of the boot floor.

**Os8472** · 30-09-2009, 20:22

Dude, that looks fecking awesome but ain't those fans a little vulnerable to flying stones and stuff?

**DK DEVELOPMENTS** · 30-09-2009, 20:32

Originally Posted by Os8472

Dude, that looks fecking awesome but ain't those fans a little vulnerable to flying stones and stuff?

I won't be using the 5 as a daily driver so should be ok. The angle of the rad and air intake should stop the odd stone from hitting the fans.

**TrixNFlix** · 30-09-2009, 20:41

Wow that welding is out of this world.

**Os8472** · 30-09-2009, 21:25

Originally Posted by DK DEVELOPMENTS

I won't be using the 5 as a daily driver so should be ok. The angle of the rad and air intake should stop the odd stone from hitting the fans.

Fair enough, so this beast your building is gunna be a track toy then, coolio, should be interesting to see what it can do

**markey b** · 01-10-2009, 00:59

track!?!

if that was my car it would get driven behind a road sweeper, and licked clean every night! attention to detail is out of this world, and i'm very very impressed!!

**JRP** · 01-10-2009, 01:25

Originally Posted by Os8472

Fair enough, so this beast your building is gunna be a track toy then, coolio, should be interesting to see what it can do

How from that brief post did you figure its a track toy.. get on a murder squad you would be the new shaft

**DK DEVELOPMENTS** · 01-10-2009, 20:36

Better pic of air intake to rad, the fans are quite out of the way....

**TrixNFlix** · 01-10-2009, 20:43

Daniel, what will this car be used for?
I just wouldnt have the balls to use it as its just to nice

**DK DEVELOPMENTS** · 01-10-2009, 20:46

Originally Posted by TrixNFlix

Daniel, what will this car be used for?
I just wouldnt have the balls to use it as its just to nice

I am going to drive it to the pod and drag race it

**TrixNFlix** · 01-10-2009, 20:50

Originally Posted by DK DEVELOPMENTS

I am going to drive it to the pod and drag race it

Fair play

Make sure you do

**Os8472** · 01-10-2009, 22:25

Originally Posted by DK DEVELOPMENTS

I am going to drive it to the pod and drag race it

Good man, what else are R5's for

**markey b** · 02-10-2009, 00:28

Originally Posted by Os8472

Good man, what else are R5's for

my orange one looks awesome tucked away in my garage

**Os8472** · 02-10-2009, 07:46

Originally Posted by markey b

my orange one looks awesome tucked away in my garage

Would look better running up the strip

**DK DEVELOPMENTS** · 07-10-2009, 21:52

Got some new pic's of my intercooler [not quite finished] and some more pic's of my rad.

**DK DEVELOPMENTS** · 07-10-2009, 22:02

pic of water pump on rad

**Chris Hebden** · 07-10-2009, 22:04

Really great work! What sort of pump is that and are you running the pipes in side or out side the body!? Chris

**DK DEVELOPMENTS** · 07-10-2009, 22:15

You can see the pump in the last pic it mounts on the side of the rad end tank.
The braided hose and fittings are AN -20 and will run under a false floor on the passengers side

**Spooky** · 07-10-2009, 22:55

Love the cheesey mugshot of Jameson in that last bunch of pics Danny

Cars getting there, looking good mate

**JRP** · 08-02-2010, 18:31

Any updates on this fantastic project ?

**DK DEVELOPMENTS** · 24-04-2010, 13:06

Originally Posted by JRP

Any updates on this fantastic project ?

Some pic's of some of the fabrication work

**DK DEVELOPMENTS** · 24-04-2010, 13:25

more pic's

**Brigsy** · 24-04-2010, 14:08

Proper job mate, looks awesome

**raj** · 24-04-2010, 16:33

pardon me but that looks absolutely fawking awsome.

**DK DEVELOPMENTS** · 24-04-2010, 16:44

Originally Posted by raj

pardon me but that looks absolutely fawking awsome.

Cheers fella, won't be long now till it's finished

**markey b** · 24-04-2010, 18:15

will it make it to ace on the 17th may??

**Tony Walker** · 24-04-2010, 19:49

So is this an art exhibition or a car? lol Also, when can i buy it???????

**The new Bill J** · 24-04-2010, 19:57

Originally Posted by markey b

will it make it to ace on the 17th may??

2057? Maybe

Looking good Danny - Now hurry up and get it finished

**Woznaldo** · 26-04-2010, 00:46

Hi Danny, top work as per usual! I do have a question though. Is your engine and box using solid mounts, as with the rigid boost pipe run, I'm concerned that the pipes will be stressed as the engine moves?

I know that the pipe connectors that you are using do allow for a little bit of play but, if the engine rocks back and forth under accel and decel, will this be enough?

**DK DEVELOPMENTS** · 26-04-2010, 07:04

Originally Posted by Woznaldo

Hi Danny, top work as per usual! I do have a question though. Is your engine and box using solid mounts, as with the rigid boost pipe run, I'm concerned that the pipes will be stressed as the engine moves?

I know that the pipe connectors that you are using do allow for a little bit of play but, if the engine rocks back and forth under accel and decel, will this be enough?

The engine has been braced to the sub frame.

**Woznaldo** · 26-04-2010, 07:43

Originally Posted by DK DEVELOPMENTS

The engine has been braced to the sub frame.

I thought you'd be all over it but, still worth checking! Top work Danny, builds like yours show what it means when talking about attention to detail.

**DK DEVELOPMENTS** · 03-05-2010, 10:33

Afew more pic's

**xenon** · 03-05-2010, 10:40

Originally Posted by DK DEVELOPMENTS

Afew more pic's

**DK DEVELOPMENTS** · 29-08-2010, 10:29

Pick my car up tomorrow

**Logg** · 29-08-2010, 10:35

Good news fella.

Is it time for it to hit the road or have you got more special bits for it before then dude?

**DK DEVELOPMENTS** · 30-08-2010, 21:55

Originally Posted by Logg

Good news fella.

Is it time for it to hit the road or have you got more special bits for it before then dude?

Just got to wire and then get it mapped.

**JRP** · 30-08-2010, 22:03

Originally Posted by DK DEVELOPMENTS

Just got to wire and then get it mapped.

Hurry up with the pics... eugine said he would get you to post some.. sooooo chop chop my fav project thread

**DK DEVELOPMENTS** · 22-10-2010, 21:33

Originally Posted by JRP

Hurry up with the pics... eugine said he would get you to post some.. sooooo chop chop my fav project thread

Sorry I haven't yet posted any new pics just been busy working on other mates cars will get some pics this week.
In the mean time here is some pics of my mates 5 that Ive been building

**Dave Reed** · 24-10-2010, 13:42

Is that Busy's 5??

**DK DEVELOPMENTS** · 25-10-2010, 08:03

Originally Posted by Dave Reed

Is that Busy's 5??

No mate it's my old apprentice's car he has had it for about 2years was standard when it got it.

**T.K** · 25-10-2010, 13:11

Wow. Best 5 ever? I think so.

Amazing work.

**DK DEVELOPMENTS** · 25-10-2010, 16:14

Originally Posted by T.K

Wow. Best 5 ever? I think so.

Amazing work.

Cheers Buddy

**Dave Reed** · 25-10-2010, 17:26

Originally Posted by DK DEVELOPMENTS

No mate it's my old apprentice's car he has had it for about 2years was standard when it got it.

Ok cool.. Your car is bloody awesome mate!! infact, I don't even think that word describes this work of art!!!

PS I got those liners of Sal in the end

**renee** · 09-12-2010, 21:02

Car looks brilliant

puts mine to shame! You must have far too much cash as I know how much these projects cost. That file of receipts will never be opened lol. Ps dont ever tell the mrs... Cant wait to see it in the flesh!

**markey b** · 10-12-2010, 11:34

any more updates?

**elcie** · 01-07-2011, 00:46

Originally Posted by markey b

any more updates?

Likewise, interested to see what's next.

**DK DEVELOPMENTS** · 03-01-2013, 19:16

Any one know if AP racing do a front caliper/disc kit for a 5 GT ?

**Penfold aka The Dealer** · 03-01-2013, 19:40

Think Duncain Grier got a set custom made....

**Brigsy** · 03-01-2013, 19:51

Anymore updates danny? Ready for this season?

**DK DEVELOPMENTS** · 03-01-2013, 20:07

Not too much left to do will try to up date pic's soon

Thread Tools