O.E boost gauge

[Misky]

Hi guys, where does the O.E boost gauge pipe exit through the bulk head?
Before my car went off the road it didnt work.
So checked behind the dials and it was cut. Fixed that but it still didnt work.
So it can it only be problem after the bulk head.
Cheers

[Brigsy]

The pipe goes through a rubber bung with the speedo wire, on the bulkhead near the heater matrix pipes.

[Misky]

Cheers for that!
Once less head scratcher

[phase i 16 v turbo]

There should be a black 90 degree connector.

[Misky]

There is a black short pipe and a white wire, which is the speedo, through the same hole so guessin its that. Its pretty much in straight line with the dash so makes sense.