-
Zvh engine wanting efi
Me and a mate of mine are doing up his zetec s. we have got a zvh for it which is a 2.0 zetec lump that we have bored to 2.1 and got forged pistons and conrods ,apr bolts.
The head is off a escort s1 rs turbo which is mfi.
We would like to have efi so we can get more power as we have 180bhp with a t3
How should we go about this as I'm used to r5gtt m there simpleness lol
Cheers
Callam
-
Non-member
Re: Zvh engine wanting efi
prob much easier doing this than efi on a gtt imo as loads of the ford bits are
interchangeable and you dont have to make manifold
easyst/cheapest way would b to get the bits from a efi cvh rs turbo and just swap all the bits over
you can use the mfi head but you will need to buy a sandwich plate for the inlet side/injectors
only limits are the depths of your pockets really
does the zetec-s not have an engine in it already??as fitting a zvh seems like a bit of a step backward?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules