Results 1 to 5 of 5
  1. #1
    Non-member Mudslinger's Avatar
    Join Date
    Feb 2003
    Posts
    520
    Post Thanks / Like

    Head Gasket

    After deciding to strip down the engine to give it a check over , im going to be needing a gasket set , when looking to purchase i came across this head gasket

    http://www.ebay.co.uk/itm/1605351961...84.m1423.l2649

    anyone used it ,is it really worth that extra cash? , a full so called uprated headgasket(Blue 1) set is £53 including the bolts which seems a no bad price and what i had been using before without probs .

    http://www.ebay.co.uk/itm/3901240073...84.m1423.l2649

  2. #2
    Member Woznaldo's Avatar
    Join Date
    Sep 2008
    Location
    Canberra, Australia
    Posts
    1,914
    Post Thanks / Like

    Re: Head Gasket

    I think some people have had issues getting the MLS gaskets to seal properly?

    If you were having no problems with what you have been using, I'd stick with that.

  3. #3
    Motech Tony Walker's Avatar
    Join Date
    Sep 2005
    Location
    Parkgate Cheshire
    Posts
    3,848
    Post Thanks / Like

    Re: Head Gasket

    I like to think of the gasket as a fuse anyway.. if the headgasket doesnt go.... what else does?

  4. #4
    Non-member Adam 005's Avatar
    Join Date
    Sep 2008
    Location
    Dorset
    Posts
    949
    Post Thanks / Like

    Re: Head Gasket

    Quote Originally Posted by Tony Walker View Post
    I like to think of the gasket as a fuse anyway.. if the headgasket doesnt go.... what else does?

  5. #5
    Non-member Mudslinger's Avatar
    Join Date
    Feb 2003
    Posts
    520
    Post Thanks / Like

    Re: Head Gasket

    Yeah i agree with that

    id rather the head gasket went than the bottom end getting a big hole thats for sure

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •