Just wondering if it's possible to fit 8x16 alloys to a GTT.
Just wondering if it's possible to fit 8x16 alloys to a GTT.
Bugger just realised I put this in the wrong section any mods that could move it to general chat please.
job doneOriginally Posted by Logg
I imagine very carefull consideration would have to be given to the offset, also stretched rubber would probably help, issue being a scrap will soon result in a smashed arch.
What size were them borbets on jimmy b's car ?
Not sure but think they must of been close to that. Does he pop by this site anymore?
Thanks Colin.
not seen him, ive gota feeling they were 7.5j , but not 100%
my porsche rear wheels it is a 8x16
7.5x16 ET20 with 195/40/16.... they are now on my clio
we tried my 8x15's off my old cabriolet on his 5, no chance in hell with their offset of ET15
that's no good.
I need the venom concept P wheels in my life.
http://www.venommotorsport.com/manuf...inBlackDiamond
Excellent. Was it much work?my porsche rear wheels it is a 8x16
not much of work, it is necessary to have the good offset,one should be ground can the rear arch body.
That looks so coolnot much of work, it is necessary to have the good offset,one should be ground can the rear arch body.
not much of work, it is necessary to have the good offset,one should be ground can the rear arch body.
Out of interest what sort of off set were they?
Sexualnot much of work, it is necessary to have the good offset,one should be ground can the rear arch body.
Is it me or should the underside of this car be smashed to pieces? Look at the size of the kerb behindnot much of work, it is necessary to have the good offset,one should be ground can the rear arch body.
I run 7.5x16 arrows with a 195 40 16, im sure my rims are et30, im sure you would get those rims to fit, like said you would have to get offset bang on.
Mine are close to the arches on the rear and close to the inner wings on the front. I now have to run a 5 or 6mm spacer on the fronts to clear my calipers and still have a bit of arch clearance.
Maybe a different offset front to rear, a et35 rear and et25-30 front and they may just fit.
phil
That's sounding more promising. They come In a few different offset the ones I first looked at are 35
I think you'll find that's a pit not a kerbIs it me or should the underside of this car be smashed to pieces? Look at the size of the kerb behind
There are some Borbet 7.5 x 16 wheels that appear to fit straight on. How well will be affected by how low you go.
E30 BMW fitment, but will need centre bores opening up, and also chamfer on rear of wheel to clear rear calipersI think you'll find that's a pit not a kerb
There are some Borbet 7.5 x 16 wheels that appear to fit straight on. How well will be affected by how low you go.
Posting Permissions
Reply With Quote