First post!
Hello my name is Marcel from the Netherlands .
My car was bought in sept 2003 al original.
It's a ph2 from 1988 .
A little later it was time for some Gaz coilovers and a few sets of rims in 15 and 16".
BBS RM 6,5 x15 ET33 with Brigdestone 195 45 15
or with Zender Turbo ph1 6x15 ET 40 with 165 50 15
or with vauxhall steel rims 6,5x16 ET37 on 165 40 16
my lasted new sets are the P slot 6x15 Et36
and a set of Speedline Monte Carlo 6x15 ET 45
Last edited by Marcel; 02-02-2015 at 19:28.
Lovely selection there fella
How low is she?
Is it possbile i've seen you @ maurice house. (mbcar..)
New poster! (less than 10 posts)
about 5 inchesOriginally Posted by 5 turbo
Lovely selection there fella
How low is she?
New poster! (less than 10 posts)
yes it could be .
Yummy
New poster! (less than 10 posts)
it's nice to drive so low but ,i can't get to the UK to the FCS grrrrrrrrrrrrrrrrrrrrrrrrrrYummy
because of the speedbumps and the ramps on the ferry .
speedbumps are a real problem here....
lovely choice of wheels mate. Especially the P slots.
god they look amazing on them zender turbos!
i like the look of them zender rims
also them vauxhall steels look good too
dosent look that low, sure youd get over here.
The one from maurice is lower and we drove that one to the uk a couple of times.
You should be ok.
Last edited by sega; 31-08-2011 at 14:20.
i like the look of them zender rims
also them vauxhall steels look good too
Novas run this, probably others to.
Hey Marcel, welcome to the club.
Thats a beautiful motor you have there. I've been talking to Chris Heemskerk regarding you guys coming over to the National Day next year so make sure you work on him
New poster! (less than 10 posts)
really nice, looks especially nice on the RM's..
New poster! (less than 10 posts)
i don't know if i will come with the black one it has i litle but of rust .Hey Marcel, welcome to the club.
Thats a beautiful motor you have there. I've been talking to Chris Heemskerk regarding you guys coming over to the National Day next year so make sure you work on him
maybe i wil break it down .
and i then take all the stuff and putt it on my ph 1 tungsten grey one .
or i wil go to the fcs like each year .
ive spoken to Chris and there is nobody intrested from the rtc to come over .
butt maybe i wil come over .
you got any pics of it on the P-Slots yet?do love your wheel choices.. man im whoring this thread
New poster! (less than 10 posts)
not yet the centerhole must machined out tot 60.1 mm.you got any pics of it on the P-Slots yet?
And then the poliser can make them bling again.
Hello
New poster! (less than 10 posts)
what a beautiful 5 you've got !
have you got full picture of it with the speedline monte carlo ??
really love Zender's turbo wheels ....
hope you come on RTOC nat day next year as you can meet each other !!!!
How disappointing!
I'll speak to Chris and see whats happening. We would really like for some of you guys to come over!
Very fcuking nice!!!
would be fantastic if you guys could make it over
New poster! (less than 10 posts)
yes i wil come to the nat . day i think.New poster! (less than 10 posts)
what a beautiful 5 you've got !
have you got full picture of it with the speedline monte carlo ??
really love Zender's turbo wheels ....
hope you come on RTOC nat day next year as you can meet each other !!!!
no pictures of the speedlines yet..
the center is milled out to 60,1 mm
now to get them shine like mad it wil take a little time and lots of money .
and then there is the tyre choice .
but i wil make an projekt topic of the thungsten 5 .
where de p slots or de speedline rim wil go under.
next year.
so the black one is in storage .
why???
because an friend of me would sell his raider with EFI
the 2 injectors
De MBE300pro turbo
only things a changed where the wheels ofcourse .
the turbines are very populair .
so i changed them for my Zenders Turbo's phase 1
zo de Renault wat ie er aan verandert tov het orgineel.
it hase an bigbrake conversie 285 mm discs ds 2500 pads en goodridge hoses .
lowered and Koni shocks.
Engine:
stage 2 MB Carperformance revisie set.
270 cam.
low compresion pistons .
MBE 300 turbo .
.
r 5 diezel rad
2,5"' K tec slash cut exhaust
uitlaat K tec 2,5" slash cut
Helix 4 padle clutch met soft pedal conversie.
clio 1 1.8 16v ecu with alterd loom (turbo)
end then you get :
at 1,6 Bar boost 192,9Whp en 259 N/m at the wheels
this setup is running sinds 2009 with lots of fun.
this is the EFI set a have:
changes for 2015
the original calipers wil be swapped for 4 pots Hi Spec ones.
xrd display mounted in the dubbeldin console
the hole interieur wil be flocked
Gaz coilovers ,it isnt low enough .
the wheels for 2015 :
option 1
15 " P slots polisted
or the 15" Speedline Monte Carlo's
Nice raider, one 5 is never enough!
Loving the raider
Very nice Marcel
Cool slash-cut exhaust.
Re: Marcel with a low gt turbo from the Netherlands
no .Nice raider, one 5 is never enough!
thats why a have 4 of them and one coupe
thanksLoving the raider
yep a know the turbines have the 5mm spacersVery nice Marcel
Cool slash-cut exhaust.
Posting Permissions
Reply With Quote
