First post!
First post!
Last edited by eddie; 18-11-2008 at 16:57.
A lot of work gone into that, looks awesome
Would not want to get tangled in them harnesses in the 2nd pic
hey man, local to me, be good to see that clio of yours.. you build it yourself. oorr.. ?
alright mate i had naths old tungy of him...thought you were putting all green hoses on it that would look awesome.. are you putting the clio on the road or are you just using it for the strip?
MY
My mate ryan p built this car fantastic car had alot of hard work go into it!what have you done so far on it since you bought it??
New poster! (less than 10 posts)
yh got green hoses and crome header tanks
okk sounds good.have you had any runs in it yet?
New poster! (less than 10 posts)
it was me a an a mate of mine a former member who built it originaly bout 2 years back. it was also a front page feature in french cars. a change of of interest ment it had to be sold. be nice to see if used for what we originaly built it for. U got any recent pictures of it
how does a mot work with a twin engine car does it need a vosa test?
pm'd
whats with the back to front turbo?
Is that the exhaust poking out the front wing?
Is that road legal?
looks good mind you
its the front engines exhaust coming out the n/s wing and its not road legal yet but there working on that so i told
New poster! (less than 10 posts)
looks like a animal mate. would love to see this go down the strip
New poster! (less than 10 posts)
it is an animal lol
New poster! (less than 10 posts)
more pic
Hehe wasn't expecting to see a standard Renault seat in there! How much does this weigh all in Eddie?
more new piccys
very nice mate......bet she fly`s...
Unless an AC cobra has turned into a Clio I very much doubt it is theirsOriginally Posted by OUTLAW
very nice mate...
mad car m8be interesting to see it go !!
how does it work , do the both engines need to be running , or can u run it as a fwd or rwd ?
update white clio turbine wheels
half of the cage has bein cut out
front mount intercooler and one for the rear engine
new ht leads
stickers taken off
you're quite at one with the engine... do you have any plans for firewall or anything or do you just drive around with the blower on for fresh air
...mine used to breath oil fumes like a bugger!!
I bet the power to weight is good tho'
no mate it really just going be a 1/4mile car lol hoping to go to the show on 29th may ope to be finished by then gon to have a big fire extguser n there lol wiv the fuel tank next to me ope see you all on the 29th
wat did you used to have andy
got on order
fibreglass bucket seat
front mont for the rear
boost hoses
need to order in the next week or 2
new green air filters
some shiny bits just to set it off
then the out side body just a genral tidy
Last edited by eddie; 10-03-2009 at 08:36.
I've got a bit of metal between the back seats and the engine on a frame, it's made out of steel but I think I'll be changing it to aluminum at some point, and then a sheet of 4mm polycarbinate for the upper half so you can still see the engine in your rear view.. it was mainly incase of fluids suddenly erupting, which I experienced when a top hose blew.. I was kind of glad I had the polycarb in place when that happened
This year I'll be building an aluminum frame and sheeting a bit like the rally turbo 2's over the engine in an attempt to cut down on the fumes
he's a pic whilst I was making it.. most of it is removable with a few bolts for ease of access to the engine
Andy, you could seal the bulkhead up gas tight to kill the fumes and noise, even with a tight fitting cover over my old rear engine you still got sick of the fumes after a couple hours driving.
Have a look at andy's clio conversion, he's welded a bulkhead in tight, sealed it up and uses a glass window in a rubber, it's real smart
https://www.rtoc.org/boards/album.php?albumid=359
I know its limited for space, but securing the harnesses there will be as helpful as using string if it gets rear-ended.A lot of work gone into that, looks awesome
Would not want to get tangled in them harnesses in the 2nd pic
i havnt fought where to put the harness yet lol
I have to admit that looks real neat! ..I was hoping get a bit of storage over the engine for a few road trips.. although that method looks quite lightweight and secure - I notice he hasn't got a roll cage to navigate.. I'll have to get the expanding foam out ..Andy, you could seal the bulkhead up gas tight to kill the fumes and noise, even with a tight fitting cover over my old rear engine you still got sick of the fumes after a couple hours driving.
Have a look at andy's clio conversion, he's welded a bulkhead in tight, sealed it up and uses a glass window in a rubber, it's real smart
https://www.rtoc.org/boards/album.php?albumid=359
you see that bar in front of the roll cage that's where mine are.. the angle is a little tight but I think it's safe
Is that the block of a VR6 i see in there?Andy, you could seal the bulkhead up gas tight to kill the fumes and noise, even with a tight fitting cover over my old rear engine you still got sick of the fumes after a couple hours driving.
Have a look at andy's clio conversion, he's welded a bulkhead in tight, sealed it up and uses a glass window in a rubber, it's real smart
https://www.rtoc.org/boards/album.php?albumid=359
That does look a really nice conversion
that looks like a cracking jobAndy, you could seal the bulkhead up gas tight to kill the fumes and noise, even with a tight fitting cover over my old rear engine you still got sick of the fumes after a couple hours driving.
Have a look at andy's clio conversion, he's welded a bulkhead in tight, sealed it up and uses a glass window in a rubber, it's real smart
https://www.rtoc.org/boards/album.php?albumid=359
vr6 turbo mark, and a mix of vw running gear, it's a work of art
Andy, you could seal the bulkhead up gas tight to kill the fumes and noise, even with a tight fitting cover over my old rear engine you still got sick of the fumes after a couple hours driving.
Have a look at andy's clio conversion, he's welded a bulkhead in tight, sealed it up and uses a glass window in a rubber, it's real smart
https://www.rtoc.org/boards/album.php?albumid=359
Scoff i remember going to a show in the rear engine car with you years ago! It was quite possible the hotest fume filled journey i have had
Yeah, but it was great though, ehScoff i remember going to a show in the rear engine car with you years ago! It was quite possible the hotest fume filled journey i have had
Mr Blocky certainly doesn't do things by halves!!! If it makes anywhere near the power of Mikes corrado it will be very interesting indeed!!vr6 turbo mark, and a mix of vw running gear, it's a work of art
Posting Permissions
Reply With Quote
